Investigation of the effect of void fraction on flow boiling heat transfer coefficient in vertically upward flow.

1975
Akkök, Metin

Suggestions

Investigation of the effect of air cooling flow rates on engine life and performance of the air-cooled multi-cylinder in-line diesel engine.
Renksizbulut, Metin; Department of Mechanical Engineering (1975)
Investigation of the effect of cleaning medium velocity and temperature on the corrosion of steel.
Ünsal, Atilla; Department of Chemical Engineering (1987)
Investigation of the effect of titania additions on the strength and elastic modulus of a mica glass ceramic by bending test and ultrasonic velocity measurements.
Dereli, Aslı; Öztürk, Abdullah; Gür, C. Hakan; Department of Metallurgical and Materials Engineering (2002)
Investigation of the influence of scale formation on the nucleate boiling heat transfer from horizontal platinum wire.
Tamer, Taylan; Department of Mechanical Engineering (1969)
Investigation of the effects of equal channel angular extrusion on light weight alloys
Karpuz, Pınar; Gür, Cemil Hakan; Karaman, İbrahim; Department of Metallurgical and Materials Engineering (2012)
Severe plastic deformation methods are of great interest in industrial forming applications, as they give rise to significant refinement in microstructures and improvements in mechanical and physical properties. In the “Equal Channel Angular Extrusion (ECAE)”, which is the most common method for production of ultrafine grained bulk samples, very high plastic strains are introduced into the bulk material without any change in cross section. This study is composed of two main parts. Part I focuses on the plas...
Citation Formats
M. Akkök, “Investigation of the effect of void fraction on flow boiling heat transfer coefficient in vertically upward flow.,” Middle East Technical University, 1975.