ESTIMATION OF HORIZONTAL PRINCIPAL STRESS ORIENTATION USING FMI LOG FOR A MINING PROJECT

Date

2019-04-16

Author

Karadeniz, Kutay Emre
Öztürk, Hasan

Metadata

Show full item record

Item Usage Stats

123
views

0
downloads

URI

https://hdl.handle.net/11511/75738

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Estimation of Wake Induced Power Loss in Wind Turbines Using Actuator Line Model Önel, Hüseyin Can; Tuncer, İsmail Hakkı (2020-06-15)
Estimation of the uniaxial compressive strength of trona and interburden rocks using the point load test results and numerical modeling Altınpınar, Mehmet; Öztürk, Hasan; Department of Mining Engineering (2016) Point load (PL) test is used as an index for rock strength classification. It is generally used for estimation of uniaxial compressive strength (UCS) because of its economic advantages and simplicity in testing. If the PL index of a specimen is known, the UCS can be estimated according to some conversion factors. Several conversion factors have been proposed by different researchers and are dependent upon the rock type. In the literature, conversion factors on different sedimentary, igneous and metamorphic ...
ESTIMATION OF SUBPIXEL SNOW-COVERED AREA BY NONPARAMETRIC REGRESSION SPLINES KUTER, SEMİH; Akyürek, Sevda Zuhal; Weber, G. -W. (Copernicus GmbH; 2016-10-17) Measurement of the areal extent of snow cover with high accuracy plays an important role in hydrological and climate modeling. Remotely-sensed data acquired by earth-observing satellites offer great advantages for timely monitoring of snow cover. However, the main obstacle is the tradeoff between temporal and spatial resolution of satellite imageries. Soft or subpixel classification of low or moderate resolution satellite images is a preferred technique to overcome this problem. The most frequently employed...
Estimation of the height of surface breaking cracks using ultrasonic timing methods Öztürk, Emre; Doyum, Bülent; Department of Mechanical Engineering (2006) In this thesis, two ultrasonic timing methods are used in order to investigate the accuracy and reliability of measurements for surface breaking cracks having different orientations and heights. Also the best applicable measurement technique is searched by comparing the received test results. These methods are the Time of Flight Diffraction (TOFD) Method using diffraction of longitudinal waves and another method using the reflection of shear waves from the crack tips. In order to simulate and measure the he...
Estimation of Target Velocity under Scarce Range Information for IR Guided Missiles Babaoglu, Bugra Can; Kutay, Ali Türker (2017-03-11) Missiles with only an infrared (IR) seeker can only be aware of the angular kinematics of the engagement - line of sight (LOS) angle and LOS angular velocity. However, in some occasions, missiles with IR seekers can be fed with low frequency range information, which is mostly provided by search radars. Nevertheless, it could be shown that, such scarcity in range information is not sufficient to solve the target-missile kinematics analytically. Still, certain numerical solutions can be applied in such situat...

Citation Formats

K. E. Karadeniz and H. Öztürk, “ESTIMATION OF HORIZONTAL PRINCIPAL STRESS ORIENTATION USING FMI LOG FOR A MINING PROJECT,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75738.