Development of A Z-80A based microcomputer for control applications.

1986
Ercan, Melih
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/7599
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

DEVELOPMENT OF AN AUTOMATIC DESIGN AND ANALYSIS TOOL FOR AXIAL FLOW COMPRESSORS
Kundes, Necmettin Anil; Aksel, Mehmet Haluk; Baran, Özgür Uğraş (2019-01-01)
This paper presents a new design and analysis tool that is developed to be employed during the design process of axial flow compressors. The tool chain implemented by this design tool consists of five parts: a mean-line design tool, followed by a blade geometry parametrization tool. Then 3D blade geometry is created, next a high quality structured mesh is generated and completed by Computational Fluid Dynamics (CFD) solution. All components employed in the new tool are either new developments, or achieved b...
Development of an automatic design and analysis tool for axial compressors
Kündeş, Necmettin Anıl; Aksel, Mehmet Haluk; Baran, Özgür Uğraş; Department of Mechanical Engineering (2017)
In this thesis, an automatic design and analysis tool is developed for the design of an axial flow compressor and to check the required design conditions of the designed compressor by using three dimensional CFD analyses automatically. The developed tool mainly consists of six parts which are mean line design, calculations based on radial equilibrium theory, parametrization, generation of three dimensional blade geometry, mesh generation and solver. A new design study for an axial flow compressor begins wit...
Development of a PC-based partial discharge detection and measurement system.
Taşcı, Alper; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (2002)
Development of a sabot design tool for aeroballistic range testing
Kafdağlı, Karaca Efe; Kayran, Altan; Department of Aerospace Engineering (2006)
The aim of this thesis is to investigate the general design and analysis principles of sabots and to develop a sabot design tool. Structures which support and align the models in gun bore, and separate without disturbing the flight path of models are called sabots. In the scope of this study, structurally critical regions and loads acting on sabots due to acceleration in the gun are determined. To calculate the loads acting and to size the sabots, approximate relations are derived by the help of strength of...
Development of a finite element computer program for large order structural analysis.
Barut, Orhan; Department of Mechanical Engineering (1981)
Citation Formats
M. Ercan, “Development of A Z-80A based microcomputer for control applications.,” Middle East Technical University, 1986.
METU IIS - Integrated Information Service open@metu.edu.tr