An Investigation on Martensitic and Magnetic Phase Transitions in Ferromagnetic Ni-Fe-Al Heusler Alloys

Date

2008-12-01

Author

Duman, Nagehan
Mehrabov, Amdulla
Akdeniz, Mahmut Vedat

Metadata

Show full item record

Item Usage Stats

116
views

0
downloads

URI

https://hdl.handle.net/11511/76354

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

An investigation on properties of monolayer copolymer twist wrap films. Uyar, Nesligül; Yılmazer, Ülkü; Department of Polymer Science and Technology (2002)
An investigation of the relationship between compressive strength and dust generation potential of magnetite pellets SİVRİKAYA, OSMAN; Arol, Ali İhsan (Elsevier BV, 2013-09-10) Iron ore pellets should have sufficient mechanical strengths against degradation at all stages of pellet production in pelletizing plants. Besides the strength, pellets should have less dust emission during operation since the process efficiency and the pelletizing equipments are adversely affected by dust. Dust is also a problem for sintered (product) pellets since they abrade during transportation from pellet production site to the reduction facilities. Sufficient mechanical strength and low dust emission...
An investigation on phase angle vector control for three phase induction motors. Nalçacı, A. Erbil; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (1996)
An experimental investigation of part load problems in centrifugal pumps Ali, Nasir Waquar; Eralp, O. Cahit; Department of Mechanical Engineering (1989)
An experimental investigation on performance of annular fins on a horizontal cylinder in free convection heat transfer Yildiz, S; Yüncü, Hafit (Springer Science and Business Media LLC, 2004-02-01) Natural convection heat transfer in annular fin-arrays mounted on a horizontal cylinder was experimentally investigated. An experimental set-up was constructed to investigate heat transfer characteristics of 18 sets of annular fin-arrays mounted on a horizontal cylinder of 24.9-mm diameter in atmospheric conditions. Keeping the fin thickness fixed at 1 mm, fin diameter is varied from 35 mm to 125 mm and fin spacing is varied from 3.6 mm to 31.7 mm. The base-to-ambient temperature difference was also varied ...

Citation Formats

N. Duman, A. Mehrabov, and M. V. Akdeniz, “An Investigation on Martensitic and Magnetic Phase Transitions in Ferromagnetic Ni-Fe-Al Heusler Alloys,” 2008, vol. 1129, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76354.