An experimental investigation of part load problems in centrifugal pumps

Download
007323.pdf
1989
Ali, Nasir Waquar
Show full item record
139
views
0
downloads
https://hdl.handle.net/11511/6218
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An experimental and numerical investigation of spray atomization in liquid-propellant rocket engines
Gülmez, Senem; Kahveci, Harika Senem; Department of Aerospace Engineering (2021-9-10)
Since the liquid rocket engines have been widely used in various flight applications, improving the efficiency and stability of those engines have become important. To achieve efficient combustion in the chamber, the injector must be carefully designed and characterized well. Although impinging jet injectors are widely used in several systems, the previous researches focused on mainly the characterization of like-doublets, thus, there is still a lack of understanding on the atomization of the other types of...
An Experimental study on static and dynamic behaviour of model pile foundations
Ünsever, Yeşim Sema; Özkan, M. Yener; Department of Civil Engineering (2015)
When the subsoil beneath a structure is weak to carry the loads from the superstructure, use of piled foundations is one of the widely employed alternatives. These types of foundations may also be subjected to transient or cyclic lateral loads arising from earthquake, wind, etc. Detailed case histories of dynamically loaded pile foundations are not too many in the literature. In this study, a series of static cyclic horizontal load tests and 1-g shaking table tests on various model foundations, such as pile...
An Experimental Investigation of Infill Behaviour in RC Frames
Demirel, İsmail Ozan; Yakut, Ahmet; Binici, Barış; Canbay, Erdem (null; 2015-11-06)
An investigation of the relationship between compressive strength and dust generation potential of magnetite pellets
SİVRİKAYA, OSMAN; Arol, Ali İhsan (Elsevier BV, 2013-09-10)
Iron ore pellets should have sufficient mechanical strengths against degradation at all stages of pellet production in pelletizing plants. Besides the strength, pellets should have less dust emission during operation since the process efficiency and the pelletizing equipments are adversely affected by dust. Dust is also a problem for sintered (product) pellets since they abrade during transportation from pellet production site to the reduction facilities. Sufficient mechanical strength and low dust emission...
An investigation on phase angle vector control for three phase induction motors.
Nalçacı, A. Erbil; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (1996)
Citation Formats
N. W. Ali, “An experimental investigation of part load problems in centrifugal pumps,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr