Application of Central Composite Design in the optimization of blank poly(lactic-coglycolic acid) nanoparticles

Çopur, Tuğba
Pehlivan, Sibel
Yet, Barbaros
Öner, Levent


Application of Multivariate Adaptive Regression Splines to Sheet Metal Bending Process for Springback Compensation
Dilan, Rasim Askin; Balkan, Raif Tuna; Platin, Bülent Emre (EDP Sciences; 2016-07-07)
An intelligent regression technique is applied for sheet metal bending processes to improve bending performance. This study is a part of another extensive study, automated sheet bending assistance for press brakes. Data related to material properties of sheet metal is collected in an online manner and fed to an intelligent system for determining the most accurate punch displacement without any offline iteration or calibration. The overall system aims to reduce the production time while increasing the perfor...
Application of spring analogy mesh deformation technique in airfoil design optimization
Yang, Yosheph; Özgen, Serkan; Department of Aerospace Engineering (2015)
In this thesis, an airfoil design optimization with Computational Fluid Dynamics (CFD) analysis combined with mesh deformation method is elaborated in detail. The mesh deformation technique is conducted based on spring analogy method. Several improvements and modifications are addressed during the implementation of this method. These enhancements are made so that good quality of the mesh can still be maintained and robustness of the solution can be achieved. The capability of mesh deformation is verified by...
Application of genetic algorithms to calibration and verification of QUAL2E
Göktaş, Recep Kaya; Aksoy, Ayşegül; Department of Environmental Engineering (2004)
The objective of this study is to develop a calibration and verification tool for the QUAL2E Model by using Genetic Algorithms. In the developed optimization model, an objective function that is formulated on the basis of the sum-of-least squares approach aiming at minimizing the difference between the observed and simulated quantities was used. In order to perform simultaneous calibration and verification, verification of the calibrated results was treated as a constraint and inserted into the objective fu...
Application of Hinf Active Vibration Control Strategy in Smart Structures
Yaman, Yavuz; Volkan, Nalbantoğlu; Tarkan, Çalışkan; Eswar, Prasad; Davıd, Waechter; Bın, Yan (2003-07-01)
In this study, H∞ controllers were designed and implemented on a smart beam. The smart beam consisted of an aluminum beam modeled in cantilevered configuration with eight surface bonded piezoelectric lead-zirconatetitanate (PZT) patches. The study used ANSYS® (v5.6) for the structural modeling of the smart beam. The system models were obtained through the system identification made on the experimental beam data. The H∞ active vibration controllers, which effectively suppressed the sinusoidally excited, in-v...
Application of performance based seismic design to tall buildings located in high seismic region
Budak, Erhan; Sucuoğlu, Haluk (null; 2017-06-09)
Citation Formats
T. Çopur, S. Pehlivan, B. Yet, and L. Öner, “Application of Central Composite Design in the optimization of blank poly(lactic-coglycolic acid) nanoparticles,” 2019, Accessed: 00, 2021. [Online]. Available: