Application of performance based seismic design to tall buildings located in high seismic region

Budak, Erhan
Sucuoğlu, Haluk
XVII International Scientific Conference- VSU 2017 (8 - 09 Haziran 2017)


Application of spring analogy mesh deformation technique in airfoil design optimization
Yang, Yosheph; Özgen, Serkan; Department of Aerospace Engineering (2015)
In this thesis, an airfoil design optimization with Computational Fluid Dynamics (CFD) analysis combined with mesh deformation method is elaborated in detail. The mesh deformation technique is conducted based on spring analogy method. Several improvements and modifications are addressed during the implementation of this method. These enhancements are made so that good quality of the mesh can still be maintained and robustness of the solution can be achieved. The capability of mesh deformation is verified by...
Application of structural modification method to nonlinear vibration analysis of bladed disks
Şayin, Burcu; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013)
High cycle fatigue failure of turbine blades is one of the most important problems in the design of gas turbine engines; hence, bladed-disk assemblies have been studied extensively for more than half a century. Damping design becomes an important issue in order to attenuate the blade vibration. For bladed-disk systems, friction damping concept is a common strategy to decrease vibration levels. There are different strategies in order to add friction damping to the system: blade-to-blade dampers such as shrou...
Application of simulation technique to water resourse development of Berdan Basin.
Ergin, Cengiz; Department of Industrial Engineering (1973)
Application of Central Composite Design in the optimization of blank poly(lactic-coglycolic acid) nanoparticles
Çopur, Tuğba; Pehlivan, Sibel; Yet, Barbaros; Öner, Levent (2019-10-14)
Application of computer-aided injection moulding simulation for thermoplastic materials
Onalir, B; Kaftanoglu, B; Balkan, Raif Tuna (1998-01-01)
This paper presents the computer-aided simulation of an injection moulding process for thermoplastic materials. The reasons for using computer simulation for the injection moulding process are discussed together with description of the mould-filling and cooling phenomena. The paper also traces the difficulties in transferring the geometry of the part database from a computer-aided design environment to a computer-aided analysis environment by proposing several solutions for plastic products. Details of simu...
Citation Formats
E. Budak and H. Sucuoğlu, “Application of performance based seismic design to tall buildings located in high seismic region,” presented at the XVII International Scientific Conference- VSU 2017 (8 - 09 Haziran 2017), 2017, Accessed: 00, 2021. [Online]. Available: