Wear characteristics of bronze filled ptfe materials when used under slideway conditions.

Date

1980

Author

Akgül, Halil

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/7740

Collections

Suggestions

Wear behavior of H10A AISI/SAE steel nitrided by various methods Yurtışık, Koray; Sarıoğlu, Filiz; Ankara, Alpay; Department of Metallurgical and Materials Engineering (2002) Wear performance of salt-bath, vacuum, ion nitrided and duplex treated (nitrided and ceramic coated by physical vapor deposition technique) steel dies (H10A AISI/SAE) were studied. The dies were used for forging of steel pastes (52100 AISI/SAE) at 1050°C under 700 MPa for 0.3 - 0.4 seconds during production of bearing rings. The nitrided and un-nitrided dies were investigated via optical and scanning electron microscopy, x-ray diffraction and micro-hardness determination procedures. The service lives of die...
Wear performance of squeeze cast A356/SiC particulate reinforced composites Tarkan, Burak; Sarıoğlu, Filiz; Department of Metallurgical and Materials Engineering (1998)
Wear behaviour of a nitrocarburized low-alloy steel Özyazgan, Tülin; Sarıtaş, Süleyman; Department of Mechanical Engineering (1984)
Creep Behaviour of a Polymer-based Underground Support Liner Güner, Doğukan; Öztürk, Hasan (2017-07-09)
Fatigue behaviour of filament wound composite tubes under axial loading Mat, Onur; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (1999)

Citation Formats

H. Akgül, “Wear characteristics of bronze filled ptfe materials when used under slideway conditions.,” Middle East Technical University, 1980.