Mikroakışkan sistemlere yönelik gelecek tahminleri

2016-01-01
Yeşil Çeliktaş, Özlem
Çetin, Barbaros
Yıldırım, Ender
Show full item record
285
views
0
downloads
https://hdl.handle.net/11511/78317
Department of Mechanical Engineering, Book / Book chapter

Suggestions

Mikroakışkan Sistemlerin Üretimi
Çetin, Barbaros; Yıldırım, Ender; Akay, Şeref (Ege Üniversitesi Basımevi, 2016-01-01)
Design and implementation of reconfigurable transmitarray unit cells employing the element rotation method by microfluidics
Erdil, Emre; Aydın Çivi, Hatice Özlem; Topallı, Kağan; Department of Electrical and Electronics Engineering (2014)
This thesis presents design, fabrication and measurement of a novel, continuously tunable, circularly polarized X-band microfluidic transmitarray unit cell. To the author’s knowledge, this is the first study in the literature where a microfluidics approach is used to tune the phase of the transmitted field through the unit cell by the element rotation method. Furthermore, the generalized transmitarray design conditions necessary to utilize the element rotation method are derived. To implement the novel micr...
Antibacterial properties and osteoblast interactions of microfluidically synhtesized chitosan – spion composite nanoparticles under external static magnetic field
Kafalı, Melisa; Ercan, Batur; Erdem, Emine Yegan; Department of Metallurgical and Materials Engineering (2022-8-18)
In this research, a multistep microfluidic reactor was used to fabricate chitosan superparamagnetic iron oxide composite nanoparticles (Ch - SPIONs) to develop antibacterial agents that can be targeted to infection foci and visualized with magnetic resonance imaging. Monodispersed Ch – SPIONs had an average particle size of 8.8 ± 1.2 nm with a magnetization value of 32.0 emu/g. These nanoparticles were used to fight against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa), which ...
Development of PDMS-based micromachining process for microfluidic reconfigurable antennas /
Seyedpour Esmaeilzad, SeyedehNasim; Külah, Haluk; Topallı, Kağan; Department of Electrical and Electronics Engineering (2015)
The objective of this thesis is to develop fabrication methods to implement microfluidic-based reconfigurable antennas. As the initial structure, a microfluidic based reconfigurable antenna is developed for transmitarrays, which consists of a multi-layered structure incorporating a microfluidic channel to confine liquid metal. The microfluidic channels are fabricated using soft lithography techniques where the channel material is PDMS. PDMS-to-glass and PDMS-to-PDMS bonding processes are optimized to achiev...
Peanut milk production by the microfluidization, physicochemical, textural and rheological properties of peanut milk products; yoghurt and kefir
Arslan, Simay; Mert, Behiç; Department of Food Engineering (2018)
The aim of this study is to investigate the physicochemical, textural and rheological properties of the peanut yogurt and kefir. In this study microfluidization was applied to obtain peanut milk instead of filter and homogenisation steps in traditional peanut milk production process. In the first part of the study, peanut yogurt was produced as three different formulations from, non-microfluidized peanut milk, microfluidized peanut milk and adding skimmed milk powder (4%, w/w) in microfluidized peanut milk,...
Citation Formats
Ö. Yeşil Çeliktaş, B. Çetin, and E. Yıldırım, Mikroakışkan sistemlere yönelik gelecek tahminleri. 2016, p. 205.
METU IIS - Integrated Information Service open@metu.edu.tr