Comparison of Mechanical Properties of Thin Spray-on Linersunder Tension and Compression

Date

2017-04-14

Author

Güner, Doğukan
Öztürk, Hasan

Metadata

Show full item record

Item Usage Stats

95
views

0
downloads

URI

https://hdl.handle.net/11511/78534

Collections

Department of Mining Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Comparison of performance of switched reluctance motors, induction motors and permanent magnet dc motors Karacan, Cüneyt; Üçtuğ, Yıldırım; Department of Electrical and Electronics Engineering (2004) Since most of the electrical energy is consumed by the electrical motors, it is necessary to use the electrical energy as efficient as possible. Throughout this study four different types of motors (induction motor, permanent magnet radial flux DC motor, permanent magnet axial flux DC motor, switched reluctance motor) are considered and compared based on their torque per unit volume and speed performance comparison. Torque per unit volume equations are obtained for each of the motor, related to quantities s...
Comparison of Performance of Surface Mounted and Embedded Fibre Bragg Grating Sensors under Fatigue Torsion Load Değerliyurt, Boray; Karataş, Cansu; Şahin, Melin; Yaman, Yavuz (null; 2019-05-21)
Comparison of seismic performance of integral and Conventional bridges Dicleli, Murat (2012-06-10)
Comparison of compressive strength test procedures for blended cements Ülker, Elçin; Yaman, İsmail Özgür; Öztürk, Abdullah; Department of Cement Engineering (2010) The aim of this thesis is to twofold, in order to demonstrate the variabilities that can be faced within the compressive strength of blended cements, one blended cement namely CEM IV / B (P-V) 32.5N is selected and the 28-day compressive strength is obtained by 16 different laboratories following TS EN 196-1 standard. Later, to show the variabilities that could be faced by different standards, three different cement types were selected and their compressive strengths are determined following two procedures ...
Comparison of terahertz technologies for detection and identification of explosives Beigang, Rene; Biedron, Sandra G.; Dyjak, Slawomir; Ellrich, Frank; Haakestad, Magnus W.; Huebsch, Daniel; Kartaloglu, Tolga; Ozbay, Ekmel; Ospald, Frank; Palka, Norbert; Puc, Uros; Czerwinska, Elzbieta; Sahin, Asaf B.; Sesek, Aleksander; Trontelj, Janez; Svigelj, Andrej; Altan, Hakan; van Rheenen, Arthur D.; Walczakowski, Michal (2014-05-06) We present results on the comparison of different THz technologies for the detection and identification of a variety of explosives from our laboratory tests that were carried out in the framework of NATO SET-193 “THz technology for stand-off detection of explosives: from laboratory spectroscopy to detection in the field” under the same controlled conditions. Several laser-pumped pulsed broadband THz time-domain spectroscopy (TDS) systems as well as one electronic frequency-modulated continuous wave (FMCW) d...

Citation Formats

D. Güner and H. Öztürk, “Comparison of Mechanical Properties of Thin Spray-on Linersunder Tension and Compression,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78534.