Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications

2018-03-15
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and the amount of Al<SUB>2</SUB>O<SUB>3</SUB> powder in the electrolyte on the mechanical and tribological properties like hardness, friction coefficient, wear rate, and the amount of deposited Al<SUB>2</SUB>O<SUB>3</SUB> were investigated.

Suggestions

Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Yılmaz, Olgun; Karakaya, İshak (2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Yılmaz, Olgun; Karakaya, İshak (2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study
Karpuz, P.; Simsir, C.; Gür, Cemil Hakan (Elsevier BV, 2009-03-15)
Equal-channel angular pressing (ECAP) is a promising severe plastic deformation method for production of ultrafine-grained bulk metals and alloys with considerably improved mechanical properties. In this study, numerical experiments were carried out to investigate the effect of strain hardening of aluminum alloys on the process performance of ECAP via finite element modeling. In the constitutive model, isothermal-plane strain, frictionless condition was assumed. The numerical results showed that strain hard...
Evaluation of laser treatment on reline-base composites
Bolayir, Giray; Turgut, Mehmet; Hubbezoglu, Ihsan; Dogan, Orhan Murat; Keskin, Selda; Dogan, Arife; Bek, Buelent (Informa UK Limited, 2007-01-01)
The effects of different laser treatments on some mechanical properties of acrylic resin and soft liner were investigated. A total of 60 test specimens were fabricated according to test requirements. The specimens were roughened with Potassium-ticanyl-Phosphate (KTP), Er:YAG, and Nd:YAG lasers before application of soft liner. The flexural, peel, and tensile bond strengths were measured using a universal testing machine. Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) sp...
Epoxy-based composites and coatings: improvement of multifunctional properties
Çaldıklıoğlu, Almira; Bayram, Göknur; Department of Chemical Engineering (2019)
The purposes of this study are to improve mechanical properties, thermal stability, resistance to flammability, electrical conductivity and hydrophobicity of epoxy (E) by incorporation of expanded graphite (EG) and titanium dioxide (T) particles. In this study, sonication with the use of solvent method was primarily determined for the epoxy-based binary composite and coating preparation. By this method, the epoxy composites and coatings were produced by changing EG concentration as 0.05, 0.1, 0.25, 0.5, 0.7...
Citation Formats
O. Yılmaz and İ. Karakaya, “Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications,” 2018, Accessed: 00, 2021. [Online]. Available: http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument.