Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings

2018-03-15
Yılmaz, Olgun
Karakaya, İshak
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and the amount of Al<SUB>2</SUB>O<SUB>3</SUB> powder in the electrolyte on the mechanical and tribological properties like hardness, friction coefficient, wear rate, and the amount of deposited Al<SUB>2</SUB>O<SUB>3</SUB> were investigated.

Suggestions

Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Yılmaz, Olgun; Karakaya, İshak (2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications
Yılmaz, Olgun; Karakaya, İshak (null; 2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study
Karpuz, P.; Simsir, C.; Gür, Cemil Hakan (Elsevier BV, 2009-03-15)
Equal-channel angular pressing (ECAP) is a promising severe plastic deformation method for production of ultrafine-grained bulk metals and alloys with considerably improved mechanical properties. In this study, numerical experiments were carried out to investigate the effect of strain hardening of aluminum alloys on the process performance of ECAP via finite element modeling. In the constitutive model, isothermal-plane strain, frictionless condition was assumed. The numerical results showed that strain hard...
Evaluation of laser treatment on reline-base composites
Bolayir, Giray; Turgut, Mehmet; Hubbezoglu, Ihsan; Dogan, Orhan Murat; Keskin, Selda; Dogan, Arife; Bek, Buelent (Informa UK Limited, 2007-01-01)
The effects of different laser treatments on some mechanical properties of acrylic resin and soft liner were investigated. A total of 60 test specimens were fabricated according to test requirements. The specimens were roughened with Potassium-ticanyl-Phosphate (KTP), Er:YAG, and Nd:YAG lasers before application of soft liner. The flexural, peel, and tensile bond strengths were measured using a universal testing machine. Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) sp...
Investigation of the effects of equal channel angular extrusion on light weight alloys
Karpuz, Pınar; Gür, Cemil Hakan; Karaman, İbrahim; Department of Metallurgical and Materials Engineering (2012)
Severe plastic deformation methods are of great interest in industrial forming applications, as they give rise to significant refinement in microstructures and improvements in mechanical and physical properties. In the “Equal Channel Angular Extrusion (ECAE)”, which is the most common method for production of ultrafine grained bulk samples, very high plastic strains are introduced into the bulk material without any change in cross section. This study is composed of two main parts. Part I focuses on the plas...
Citation Formats
O. Yılmaz and İ. Karakaya, “Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings,” 2018, Accessed: 00, 2021. [Online]. Available: http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument.