Experimental Investigation of Cuttings Transport in Horizontal Wells Using Aerated Drilling Fluids

Date

2017-11-16

Author

Gül, Sercan
Kuru, Ergün
Parlaktuna, Mahmut

Metadata

Show full item record

Item Usage Stats

146
views

0
downloads

URI

https://hdl.handle.net/11511/78749

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental investigation of cuttings transport in horizontal wells using aerated drilling fluid Gül, Sercan; Parlaktuna, Mahmut; Kuru, Ergün; Department of Petroleum and Natural Gas Engineering (2017) A new experimental approach has been introduced in this thesis for the cuttings transport in horizontal wellbores with the introduction of drag reducers into the aerated drilling fluids. Advanced Flow Loop System (annular test section of 21 ft. long 2.91-in. ID transparent casing and 1.85 in. OD inner drill pipe) in Middle East Technical University Petroleum and Natural Gas Engineering Department have been used for the experiments. The liquid phase has been water and water-PHPA copolymer mixture where the g...
Experimental investigation of hydroforming of dishwasher parts Akın, Tolga; Gökler, Mustafa İlhan; Department of Mechanical Engineering (1997)
Experimental investigation of the failure of air plasma sprayed thermal barrier coatings Kütükoğlu, Başar; Çöker, Demirkan; Department of Aerospace Engineering (2015) In this thesis, an experimental method is developed to determine the interfacial fracture toughness of air plasma sprayed thermal barrier coatings. The thesis is composed of three major parts. In the first part, nanoindentation is used to measure the elastic modulus and hardness of the APS TBC specimens composed of three major layers: Inconel 718 substrate, NiCrAlY based metallic bond coat (BC) and YSZ based ceramic top coat (TC). Microscopy, XRD and EDS are used for metallurgical characterization. In the s...
Experimental Investigation of Thermal Performance of an Aluminum Flat-Grooved Heat Pipe Aljanvad, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (2017-08-31)
Experimental investigation of oil accumulation in inter ring crevice volumes in internal combustion engines İçöz, Tunç; Dursunkaya, Zafer; Department of Mechanical Engineering (2001)

Citation Formats

S. Gül, E. Kuru, and M. Parlaktuna, “Experimental Investigation of Cuttings Transport in Horizontal Wells Using Aerated Drilling Fluids,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/78749.