Experimental investigation of hydroforming of dishwasher parts

Download

068640.pdf

Date

1997

Author

Akın, Tolga

Metadata

Show full item record

Item Usage Stats

113
views

0
downloads

URI

https://hdl.handle.net/11511/10579

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Experimental investigation of oil accumulation in inter ring crevice volumes in internal combustion engines İçöz, Tunç; Dursunkaya, Zafer; Department of Mechanical Engineering (2001)
Experimental Investigation of Cuttings Transport in Horizontal Wells Using Aerated Drilling Fluids Gül, Sercan; Kuru, Ergün; Parlaktuna, Mahmut (null; 2017-11-16)
Experimental Investigation of Strength of Curved Beam by Thin Ply Non-Crimp Fabric Laminates Arca, M. A.; PAPİLA, MELİH; Çöker, Demirkan (2016-06-09) Resistance against delamination failure and through the thickness tensile properties of curved carbon fiber reinforced plastics composites are investigated experimentally by conducting the curved beam strength tests. Effect of novel material thin ply non crimp fabric (NCF) architecture on delamination resistance of carbon fiber reinforced composites are investigated and compare with that of standard UD layups. In order to determine through the thickness tensile properties of curved carbon fiber composites, ...
Experimental Investigation of Thermal Performance of an Aluminum Flat-Grooved Heat Pipe Aljanvad, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (2017-08-31)
Experimental investigation of the failure of air plasma sprayed thermal barrier coatings Kütükoğlu, Başar; Çöker, Demirkan; Department of Aerospace Engineering (2015) In this thesis, an experimental method is developed to determine the interfacial fracture toughness of air plasma sprayed thermal barrier coatings. The thesis is composed of three major parts. In the first part, nanoindentation is used to measure the elastic modulus and hardness of the APS TBC specimens composed of three major layers: Inconel 718 substrate, NiCrAlY based metallic bond coat (BC) and YSZ based ceramic top coat (TC). Microscopy, XRD and EDS are used for metallurgical characterization. In the s...

Citation Formats

T. Akın, “Experimental investigation of hydroforming of dishwasher parts,” Middle East Technical University, 1997.