Effect of Metalloid Addition on Anomalous Primary Crystallization of Al-RE Metallic Glasses

2017-02-26
Kutsal, Mustafacan
Çam, Burcu
Kalay, Yunus Eren

Suggestions

Effect of Sn Alloying on the Diffusion Bonding Behavior of Al-Mg-Si Alloys
Atabay, SILA ECE; Esen, Ziya; Dericioğlu, Arcan Fehmi (2017-07-01)
Effect of Sn as an alloying element on the diffusion-bonding behavior of Al-Mg-Si alloy has been studied by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and mechanical testing of the diffusion-bonded joint. XRD results revealed the formation of Mg2Sn and (Sn) phases during solidification following induction casting. DSC results showed local liquid (Sn) formation during the bonding process for Sn-containing alloys, where its amount was found to...
Effect of Alloying Additions on the Strength of Confined Nanocrystalline Layers
Fathipour, Sevda; Motallebzadeh, Amir; Duygulu, Özgür; Özerinç, Sezer (2021-03-15)
Effect of transition metal substitution on high-temperature properties of thermoelectric materials
Güneş, Murat; Özenbaş, Ahmet Macit; Parlak, Mehmet; Department of Micro and Nanotechnology (2014)
The objective of the present dissertation is to improve the thermoelectric efficiency (ZT) of Ca3Co4O9 metal oxide with a focus on nanostructuring, porosity and elemental substitution altering the electrical and thermal transport properties at high temperature and to establish a unique high temperature Seebeck coefficient and electrical resistivity measurement system. An instrument for the high temperature measurement of Seebeck coefficient and electrical resistivity of one and/or two bulk samples over a te...
Effect of Sm on Crystallization Kinetics of Cu-Zr-Al Metallic Glasses
Sıkan, F.; Polat, G.; Kalay, I.; Kalay, Yunus Eren (Elsevier BV, 2020-01-01)
The effect of Sm micro-alloying on non-isothermal and isothermal crystallization kinetics of (Zr50Cu40Al10)(100-x)Sm-x (x = 0, 2, 4 at. % Sm) alloys were investigated using differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Crystallization activation energies for each composition were calculated in non-isothermal conditions using Kissinger and Ozawa methods and in isothermal conditions using Johnson-Mehl-Avrami model. XRD analysis showed that crysta...
Effect of silver incorporation on crystallization and microstructural properties of sol-gel derived titania thin films on glass
Akgun, Betul Akkopru; Durucan, Caner; Mellott, Nathan P. (Springer Science and Business Media LLC, 2011-04-01)
Titanium dioxide (TiO(2)) thin films, with and without silver (Ag), were prepared on float glass via sol-gel processing. The float glass substrates were pre-coated with a silica-barrier layer prior to the deposition of TiO(2)-based thin films. Silver nanoparticle incorporation into the TiO(2) matrix was achieved by thermal reduction of Ag ions dissolved in a titanium-n-butoxide (Ti[O(CH(2))(3)CH(3)](4)) based sol during calcination in air at 250, 450 and 650 A degrees C. Thin films were characterized using ...
Citation Formats
M. Kutsal, B. Çam, and Y. E. Kalay, “Effect of Metalloid Addition on Anomalous Primary Crystallization of Al-RE Metallic Glasses,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79195.