Effect of Curing Time on Elastic Material Properties of Thin Spray on Liners

2015-09-14
Güner, Doğukan
Öztürk, Hasan
Show full item record
52
views
0
downloads
https://hdl.handle.net/11511/79352
Unverified, Conference / Seminar

Suggestions

Effect of fiber and resin types on mechanical properties of fiber-reinforced composite pipe
Gokce, Neslihan; Yılmazer, Ülkü; SUBAŞI, SERKAN (Thomas Telford Ltd., 2019-09-01)
The aim of this study was to evaluate the effects of the types of fiber and resin on the mechanical properties of polyester composite pipes. Orthophthalic, isophthalic and vinyl ester resins were used as the matrix; E-glass, electrical/chemical resistance (ECR)-glass and basalt fibers were used as reinforcement; and 98% silica (SiO2) sand was used as filler in mixtures. Samples were produced by the centrifugal casting method. Samples cut from the produced pipes were tested to determine stiffness and longitu...
Effect of differential lubrication on the cup drawing of mild steel blanks
Atala, H. (Elsevier BV, 1990-7)
Cup-drawing test have been performed on mild steel blanks to study the frictional behaviour of the flanges in a cup-drawing operation, by utilizing differential lubrication. Molybdenum disulphide paste has been chosen as the lubricant because of its good performance in preliminary trials. The results suggest that lubrication of the flange is essential in the achievement of a fully drawn cup without failure and without wrinkles. It can also be stated that lubricant application to central regions appears to b...
Effect of Thickness on Magnetic Properties of Fe36Co36B19.2Si4.8Mo2W2 Thin Film Prepared by Thermionic Vacuum Arc
Perincek, F.; Erturk, K.; AYKOL, M.; Kucuk, I.; Akdeniz, Mahmut Vedat (Institute of Physics, Polish Academy of Sciences, 2012-01-01)
Fe36Co36B19.2Si4.8Mo2W2 amorphous thin films have been produced by thermionic vacuum arc with thickness varying from 200 nm to 260 mn. X-ray diffraction has been employed to reveal a predominant amorphous phase in the as-prepared samples, although a small crystalline fraction cannot be excluded. The bulk magnetic properties of thin films were examined at room temperature using an ADE Magnetics EV9 vibrating sample magnetometer with maximum magnetic field strength of 1750 kA/m, real-time field control and dy...
Effect of coating materials and mixture constituents on the permeability of concrete
Tekin, Ahmet Veli; Erdoğan, Sinan Turhan; Department of Civil Engineering (2012)
The improvement in the impermeability of concrete was studied using different methods. The main aim was to investigate impermeability improvement of concrete and to compare these methods. Two different methods were examined to investigate and compare impermeability and strength improvement of concrete by using two different sets of concrete specimens. These methods included the application of coating materials to concrete and the production of concrete using different constituent amounts and types. The firs...
Effect of variable friction coefficient on sheet metal drawing
Darendeliler, Haluk; Yucesoy, CA (Elsevier BV, 2002-02-01)
A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for ci...
Citation Formats
D. Güner and H. Öztürk, “Effect of Curing Time on Elastic Material Properties of Thin Spray on Liners,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79352.
METU IIS - Integrated Information Service open@metu.edu.tr