Optimized computer aided design of metallic springs.

1983
Eribol, H Müfit

Suggestions

Optimized computer-aided design of gear-transmissions.
Türkemn, Bahri; Department of Mechanical Engineering (1979)
Optimized computer aided design of journal barings.
Ardıç, Hıfzı; Department of Mechanical Engineering (1981)
Optimisation of ceramic suspensions
Brıscoe, Brian J.; Khan, Asad U.; Luckham, Paul F.; Özkan, Necati (1997-12-01)
Optimized Electromagnetic Harvester with a Non-Magnetic Inertial Mass
Ulusan, Hasan; Yasar, Oguz; Zorlu, Ozge; Külah, Haluk (2015-09-09)
This paper presents an optimization study to decrease the operation frequency and increase the output power of a miniature electromagnetic (EM) energy harvester, by incorporating a non-magnetic inertial mass together with the moving magnet. The harvester coil position has been optimized through FEM, and validated through tests. Experimental studies on the inertial mass showed that increasing the magnet size further increases the resonance frequency due to the increased magnetic forces. Conversely, using a n...
Optimized computer-aided design of gera transmissions for perpendicular shafts.
Ergür, Halil Sedat; Department of Mechanical Engineering (1980)
Citation Formats
H. M. Eribol, “Optimized computer aided design of metallic springs.,” Middle East Technical University, 1983.