Reliability Lifeline Networks with Multiple Sources Under Seismic hazard

Date

1995-05-04

Author

Kestel, Sevtap Ayşe
Yücemen, M Semih

Metadata

Show full item record

Item Usage Stats

143
views

0
downloads

URI

https://hdl.handle.net/11511/80016

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Reliability-Based Risk Assessment of Rubble Mound Breakwaters Under Tsunami Attack Ergin, Ayşen (2002-09-01) In the reliability-based risk assessment, the second order reliability index (beta II) method and the Conditional Expectation Monte Carlo (CEMC) simulation were utilised in order to analyse the safety levels of Haydarpasa Port main breakwater, Sea of Marmara, Turkey. The failure probability was forecasted in the beta II method by approximating the Hudson performance surface with a second-degree polynomial having an equal curvature at the design point where the design and structural parameters were taken int...
Reliability-based stability analysis and risk assessment for rock slides of Ramnefjell Duezguen, H. S. B.; Grimstad, E. (2007-08-03)
Reliability-based Unified SPT-CPT-Vs Liquefaction Triggering Models Çetin, Kemal Önder; Ayhan, Bilal Umut; Moss, R.; Kayen, R. (2022-06-27)
Reliability-based maintenance optimization of walking draglines Gölbaşı, Onur; Demirel, Nuray; Department of Mining Engineering (2015) Dragline is an earthmover extensively utilized in open cast coal mines for overburden stripping activities. Since the machinery breakdowns may induce high amount of production losses, draglines are required to be operated with high availability. In this sense, effective maintenance policies are essential to improve longevity of dragline component and sustainability of operations. In this research study, it is aimed to develop a reliability-based maintenance optimization models for two walking draglines, Pag...
Reliability concerns of lead-free solder use in aerospace applications Baylakoglu, Ilknur (2007-06-16) In this paper, it has been provided the impact of lead free solder use in electronics to the aerospace electronics in the aerospace environment. These impacts especially have been faced in the areas of reliability, assembly methods, cost drivers, supply chain management, and alternative materials selection. Reliability will probably be the most significant factor for the aerospace industry if it converts to Pb free. So, the question has been addressed by focusing in the reliability issues in this paper. Som...

Citation Formats

S. A. Kestel and M. S. Yücemen, “Reliability Lifeline Networks with Multiple Sources Under Seismic hazard,” 1995, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80016.