Effect of Heat Treatment on the Microstructure and Surface Properties of Ni-Based Platings

Date

2018-10-27

Author

Başkan, Mertcan
Erdoğan, Metehan
Karakaya, İshak

Metadata

Show full item record

Item Usage Stats

82
views

0
downloads

URI

http://www1.metalurji.org.tr/immc2018/bildiriler_kitabi.pdf
https://hdl.handle.net/11511/80528

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Effect of Heat Treatment on the Microstructure and Surface Properties of Ni-Based Platings Başkan, Mertcan; Erdoğan, Metehan; Karakaya, İshak (null; 2018-10-27)
Effect of surface treatment on electrical conductivity of carbon black filled conductive polymer composites Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur (Wiley, 2007-06-05) Two different types of surface modifiers, 3-aminopropyltriethoxysilane and formamide, were applied to carbon black (CB) particles to lower electrical resistivity of polymer composites prepared by treated CB. Two different matrices, low-density polyethylene and nylon 6, were chosen to compound with surface modified CB. Surface energy of CB was increased by adding amine or amide functional groups during surface treatment of CB. According to electron spectroscopy for chemical analysis (ESCA), chemical modifica...
Effect of heat treatment on microstructural and mechanical properties of molybdenum based PM ferrous alloys Davoudnezhad, Ramona; Ögel, Bilgehan; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2016) In this study, the effect of different heat treatment processes on microstructural and mechanical properties of Distaloy-DH and Astaloy Mo (Fe-2Cu-1.5Mo) powders are investigated. Powder samples are sintered at 1120°C for 45 minutes in a sintering furnace under reducing atmosphere of: 10% H2 + 90% N2. After sintering, secondary heat treatments are performed on samples. Microstructural characterization of samples is done with optical and electron microscopy. Selective etching is utilized for determining the ...
Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires Ozdemir, Baris; Kulakci, Mustafa; Turan, Raşit; Ünalan, Hüsnü Emrah (IOP Publishing, 2011-04-15) Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed ...
Effect of heat treatment on the stress and structure evolution of plasma deposited boron nitride thin films Anutgan, T. Aliyeva; Anutgan, M.; Wdemir, O.; Atilgan, I.; Katircioglu, B. (Elsevier BV, 2008-03-25) Boron nitride (BN) thin films are deposited at 573 K by plasma enhanced chemical vapor deposition (PECVD) with ammonia (NH3) and hydrogen diluted diborane (15% B2H6 in H-2) source gases. UV-visible and Fourier transform infrared (FTIR) spectroscopies together with surface profilometry are used for the film characterization. These films are hydrogenated (BN:H) whose hydrogen content is pursued following the 1.5 h annealing process at 748 K, 923 K and 1073 K under nitrogen atmosphere. Hydrogen escape with the...

Citation Formats

M. Başkan, M. Erdoğan, and İ. Karakaya, “Effect of Heat Treatment on the Microstructure and Surface Properties of Ni-Based Platings,” 2018, Accessed: 00, 2021. [Online]. Available: http://www1.metalurji.org.tr/immc2018/bildiriler_kitabi.pdf.