Optimization of the Fabrication Process for Al-doped ZnO Thin Films on Soda Lime Glass Substrates by Thermal Heating

Date

2017-10-25

Author

Bayraklı, Özge
Güllü, Hasan Hüseyin
Terlemezoğlu, Makbule
Parlak, Mehmet

Metadata

Show full item record

Item Usage Stats

88
views

0
downloads

URI

https://hdl.handle.net/11511/81123

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Optimization of the Diffusion Bonding Process for Al 6063 Alloy Atabay, Sila Ece; Dericioğlu, Arcan Fehmi (null; 2017-03-02)
Optimization Of The Mechanical Properties Of The Ti 6Al 4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processes Bilgin, Guney Mert; Dericioğlu, Arcan Fehmi; Esen, Ziya; Kushan Akin, Seniz Reyhan (null; 2016-02-14)
Optimization of laser processing for PERC type c-Si solar cells Genç, Ezgi; Turan, Raşit; Department of Micro and Nanotechnology (2019) Passivated Emitter Rear Contact (PERC) type solar cells, which currently owns a similar market share as the standard type solar cells, is expected to be the dominant type of the photovoltaic (PV) market in near future (ITRPV, 2019) due to its high performance/cost ratio. Hence, it is critical to optimize PERC process steps to achieve higher efficiencies. In PERC concept, the stack of a passivation layer and SiNx capping layer is locally ablated to form low recombination and low resistive contacts. In this w...
Optimization of fabrication steps for n-type c-Si solar cells Orhan, Efe; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2019) Crystalline silicon (c-Si) solar cells fabricated on p-type wafers are still dominating the photovoltaic (PV) industry due to advantages in device processing and early focus on p-type cells in the development phase of the industry. Over the years, studies on n-type Czochralski (CZ) substrates have shown that they can be more desirable for the terrestrial applications due to superior material and process advantages such as higher minority carrier lifetime, easier passivation of the surface, absence of light ...
Optimization of ferronickel production from Sivrihisar nickel laterite ore Pournaderi, Saeid; Geveci, Ahmet; Topkaya, Yavuz Ali; Department of Metallurgical and Materials Engineering (2014) In this study, pyrometallurgical treatment of limonitic laterite ore from Sivrihisar region was investigated. The run-of-mine (ROM) ore contained 1.26 wt.% Ni but was initially upgraded to 1.405 wt.% Ni by screening out the +50 mm particles. Finer than 50 mm ore was crushed to -1 mm and used in the experiments. Then, the ore was calcined at different temperatures. The optimum calcination conditions were determined as 700°C and 40 min. which resulted in 10% weight loss. At the next (prereduction) stage, the ...

Citation Formats

Ö. Bayraklı, H. H. Güllü, M. Terlemezoğlu, and M. Parlak, “Optimization of the Fabrication Process for Al-doped ZnO Thin Films on Soda Lime Glass Substrates by Thermal Heating,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81123.