Optimization Of The Mechanical Properties Of The Ti 6Al 4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processes

Date

2016-02-14

Author

Bilgin, Guney Mert
Dericioğlu, Arcan Fehmi
Esen, Ziya
Kushan Akin, Seniz Reyhan

Metadata

Show full item record

Item Usage Stats

106
views

0
downloads

URI

http://www.tms.org/meetings/annual-16/downloads/finalprogram/AM16_FINAL_FULL.pdf
https://hdl.handle.net/11511/88170
https://www.tms.org/meetings/annual-16/AM16proceedings.aspx#.YFBblZ0zYdU

Conference Name

TMS 2016 145th Annual Meetıng & Exhıbıtıon, 14 - 18 February 2016

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes BILGIN, Guney Mert; Esen, Ziya; Akin, Seniz Kushan; Dericioğlu, Arcan Fehmi (2017-07-17) 2-step Thermo Hydrogen Process (THP) including hydrogenation and dehydrogenation steps was applied to Ti-6Al-4V alloy fabricated by selective laser melting (SLM) process to refine the microstructure and to increase the ductility of the alloy. It was observed that as-fabricated alloy's surface was composed of oxides of titanium and aluminum, which may alter the hydrogenation kinetics. The hydrogen treatment for 1 hat 650 degrees C, the maximum hydrogen solubility temperature of the alloy, transformed startin...
Optimization of the mechanical properties of Ti-6Al-4V alloy produced by three dimensional additive manufacturing using termochemical processes Bilgin, Güney Mert; Durucan, Caner; Esen, Ziya; Department of Metallurgical and Materials Engineering (2017) Selective laser melting (SLM) is an additive manufacturing (AM) technology used for aerospace and biomedical Ti-6Al-4V alloys to produce parts with complex geometry at one step with reduced production time, scrap and cost. However, parts produced by SLM are lack of ductility due to microstructures similar to those cast products and residual stresses generated during laser processing. In this study, Ti6Al-4V alloys produced by SLM were treated by thermo-hydrogen process (THP) to increase ductility and to ref...
Optimization of the Fabrication Process for Al-doped ZnO Thin Films on Soda Lime Glass Substrates by Thermal Heating Bayraklı, Özge; Güllü, Hasan Hüseyin; Terlemezoğlu, Makbule; Parlak, Mehmet (null; 2017-10-25)
Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs Using a Gear Dynamics-Based Approach Ozturk, Yalin; Ciğeroğlu, Ender; Özgüven, Hasan Nevzat (2015-08-05) A gear tooth profile optimization study is performed with the target being defined as the maximization of tooth bending fatigue life for a selected operational range, where the operating torque and speed ranges are defined along with their corresponding durations. For this purpose, a nonlinear lumped gear dynamics model is combined with the S/N curve of the gear material in order to estimate tooth bending fatigue life of the spur gear pair. The differences between the predicted lives of the optimally modifi...
Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs using a Gear Dynamics based Approach ÖZTÜRK, YALIN; Ciğeroğlu, Ender; Özgüven, Hasan Nevzat (2015-08-05) A gear tooth profile optimization study is performed with the target being defined as the maximization of tooth bending fatigue life for a selected operational range, where the operating torque and speed ranges are defined along with their corresponding durations. For this purpose, a nonlinear lumped gear dynamics model is combined with the S/N curve of the gear material in order to estimate tooth bending fatigue life of the spur gear pair. The differences between the predicted lives of the optimally modifi...

Citation Formats

G. M. Bilgin, A. F. Dericioğlu, Z. Esen, and S. R. Kushan Akin, “Optimization Of The Mechanical Properties Of The Ti 6Al 4V Alloy Fabricated By Additive Manufacturing Using Thermochemical Processes,” presented at the TMS 2016 145th Annual Meetıng & Exhıbıtıon, 14 - 18 February 2016, Nashville, USA, 2016, Accessed: 00, 2021. [Online]. Available: http://www.tms.org/meetings/annual-16/downloads/finalprogram/AM16_FINAL_FULL.pdf.