Deposition and characterization of ZTSeS thin films for photovoltaic applications

Date

2017-04-28

Author

Bayraklı, Özge
Terlemezoğlu, Makbule
Güllü, Hasan Hüseyin
Sürücü, Gökhan
Parlak, Mehmet

Metadata

Show full item record

Item Usage Stats

35
views

0
downloads

URI

https://hdl.handle.net/11511/81691

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Deposition and testing of thin film hydrogen separation membranes Pişkin, Fatih; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2013) Industrial production of hydrogen from the syngas, generated from steam reformation of natural gas or coal gasification, sets conditions for hydrogen separation membranes in terms of operating conditions. An alternative source for hydrogen is a syngas generated by gasification of municipal solid wastes which are likely to set more stringent conditions for the separation membranes. There is therefore, a growing demand for separation membranes with improved permeability and particularly of low cost. Among var...
Deposition and characterization of layer-by-layer sputtered AgGaSe2 thin films KARAAĞAÇ, HAKAN; Parlak, Mehmet (Elsevier BV, 2011-04-15) Sputtering technique has been used for the deposition of AgGaSe2 thin films onto soda-lime glass substrates using sequential layer-by-layer deposition of GaSe and Ag thin films. The analysis of energy dispersive analysis of X-ray (EDXA) indicated a Ga-rich composition for as-grown samples and there was a pronounce effect of post-annealing on chemical composition of AgGaSe2 thin film. X-ray diffraction (XRD) measurements revealed that Ag metallic phase exists in the amorphous AgGaSe2 structure up to annealin...
Deposition of CZTSe thin films and illumination effects on the device properties of Ag/n-Si/p-CZTSe/In heterostructure Bayrakli, O.; Terlemezoğlu, Makbule; GULLU, H. H.; Parlak, Mehmet (2017-06-30) Characterization of Cu2ZnSnSe4 (CZTSe) thin films deposited by thermal evaporation sequentially from the pure elemental sources and in-situ post annealing was carried out at 400 C under Se evaporation atmosphere. Another annealing process was applied in nitrogen atmosphere at 450 degrees C to get poly-crystalline monophase CZTSe film structure. XRD analysis together with Raman spectroscopy was used to determine the structural properties. Spectral optical absorption coefficient evaluated from transmission da...
Deposition of AgGaS2 thin films by double source thermal evaporation technique KARAAĞAÇ, HAKAN; Parlak, Mehmet (Springer Science and Business Media LLC, 2011-09-01) In this study, polycrystalline AgGaS2 thin films were deposited by the sequential evaporation of AgGaS2 and Ag sources with thermal evaporation technique. Thermal treatment in nitrogen atmosphere for 5 min up to 700 A degrees C was applied to the deposited thin films and that resulted in the mono phase AgGaS2 thin films without the participation of any other minor phase. Structural and compositional analyses showed the structure of the films completely changes with annealing process. The measurements of tra...
FABRICATION AND CHARACTERIZATION OF TiO2 THIN FILM FOR DEVICE APPLICATIONS HOSSEINI, AREZOO; GÜLLÜ, HASAN HÜSEYİN; COŞKUN, EMRE; Parlak, Mehmet; Erçelebi, Ayşe Çiğdem (2019-07-01) Titanium oxide (TiO2) film was deposited by rectification factor (RF) magnetron sputtering technique on glass substrates and p-Si (111) wafers to fabricate n-TiO2/p-Si heterojunction devices for the investigation of material and device properties, respectively. The structural, surface morphology, optical and electrical properties of TiO(2 )film were characterized by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), UV-visual (UV-Vis) spectral and dark curre...

Citation Formats

Ö. Bayraklı, M. Terlemezoğlu, H. H. Güllü, G. Sürücü, and M. Parlak, “Deposition and characterization of ZTSeS thin films for photovoltaic applications,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81691.