Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings

Date

2018-02-01

Author

Yılmaz, Olgun
Erdoğan, Metehan
Karakaya, İshak

Metadata

Show full item record

Item Usage Stats

119
views

0
downloads

URI

http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument
https://hdl.handle.net/11511/81848

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of structural and electronic properties of ZnCdTe ternary alloy nanostructures Kurban, Mustafa; Erkoç, Şakir; Department of Physics (2016) Nanostructures, including II-VI compound semiconductors, have attracted enormous attention in a wide range of applications of nanotechnology due to the unusual mechanical, electrical and thermal properties under varying size, geometry, temperature and pressure when compared to corresponding bulk materials. However, these properties are not directly measurable by experiments because of the methods or the availability of the experimental tools, so theoretical models and computations play an important role in ...
INVESTIGATION OF THE MICROSTRUCTURE AND HARDNESS OF SiCP REINFORCED ALUMINUM MATRIX COMPOSITES MAKSZIMUS, Andrea; GACSI, Zoltan; Gür, Cemil Hakan (2007-10-16) The purpose of this study is to find a relationship between the parameters describing the microstructural homogeneity of SiC particle reinforced Al metal matrix composites. The Al-SiC powder mixtures having different particle size combinations were hot-pressed after careful mixing. The optical microscope images of the microstructures were processed by using an image analyzing program; the binary morphology was chosen for characterizing the SiC particle distribution.
Investigation of the microstructure and hardness of SiCP reinforced aluminum matrix composites Makszimus, Andrea; Gácsi, Zoltán; Gür, Cemil Hakan (2008-01-01) The purpose of this study is to find a relationship between the parameters describing the microstructural homogeneity of SiC particle reinforced Al metal matrix composites. The Al-SiC powder mixtures having different particle size combinations were hot-pressed after careful mixing. The optical microscope images of the microstructures were processed by using an image analyzing program; the binary morphology was chosen for characterizing the SiC particle distribution.

Citation Formats

O. Yılmaz, M. Erdoğan, and İ. Karakaya, “Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings,” 2018, Accessed: 00, 2021. [Online]. Available: http://www.programmaster.org/PM/PM.nsf/ApprovedAbstracts/14681138425C1E968525814F004A828F?OpenDocument.