Development of a 100m Stand Off mm Wave 3D Imaging System Based on a GDD Array

Altan, Hakan
Abramovich, Amir
Ytzhaky, Ytzhak
Kopeika, Natan


Development of a sabot design tool for aeroballistic range testing
Kafdağlı, Karaca Efe; Kayran, Altan; Department of Aerospace Engineering (2006)
The aim of this thesis is to investigate the general design and analysis principles of sabots and to develop a sabot design tool. Structures which support and align the models in gun bore, and separate without disturbing the flight path of models are called sabots. In the scope of this study, structurally critical regions and loads acting on sabots due to acceleration in the gun are determined. To calculate the loads acting and to size the sabots, approximate relations are derived by the help of strength of...
Development of a 3D Grain Burnback Simulation Tool for Solid Rocket Motors
Ata, Yusuf; Kurtuluş, Dilek Funda; Arkun, Ö. Uğur (2018-01-01)
Development of a 60 w pulsed fiber laser amplifier for materials processing
Aydın, Yiğit Ozan; Bek, Alpan; Şahin, Asaf Behzat; Department of Micro and Nanotechnology (2014)
Fiber lasers have the advantage of high beam quality, high efficiency, small size, air cooling and therefore much interest in the development of high power fiber laser systems have arisen recently in the world. Almost all commercially developed fiber lasers with nanosecond pulse duration, that are being used for material processing, are Q-switched systems. Vital parameters in the material processing such as repetition rate, pulse energy and pulse duration are correlated with each other and they cannot be ad...
Development of a PC based telestethoscope over IP networks
Özgün, Oktay; Eyüboğlu, Murat; Department of Electrical and Electronics Engineering (2001)
Development of an Intelligent Least Squares Based Linear Controller for Autonomous Helicopters
Kubali, Eser; Yavrucuk, İlkay (2016-06-10)
In this paper, a novel PID gain update law using linear least squares regression is introduced as an adaptive control method for autonomous helicopters. In addition, prediction analysis is conducted for error dynamics of the closed loop system using recursive linear least squares regression. Combining these two concepts with classical PID controller, an intelligent PID controller is obtained. A flight controller with three control loops is developed to demonstrate the capabilities of the controller. Finally...
Citation Formats
H. Altan, A. Abramovich, Y. Ytzhaky, and N. Kopeika, “Development of a 100m Stand Off mm Wave 3D Imaging System Based on a GDD Array,” 2015, Accessed: 00, 2021. [Online]. Available: