Röle seçimi ile tüme gönderim için ayrık röle hüzme şekillendirme

2015-05-16
Tuncer, Temel Engin
Show full item record
108
views
0
downloads
In this paper, broadcast beamforming problem is considered in relay-assisted wireless networks. Two-phase relay communication is adopted. In the first phase, a source transmits common information to multiple relays which use amplify-andforward relay protocol. Each relay multiplies its received signal by a complex weight and transmits it to the receivers. The amplitudes and phases of complex relay weights are chosen from discrete sets in order to decrease overhead for the feedback channel. Relay selection is employed in order to decrease network complexity. Nonlinear optimization problem is converted to a linear form suitable for mixed integer linear programming. The optimum solution can be found using branch-and-cut method.
Discrete beamforming, Mixed integer linear programming, Relay beamforming, Relay selection
https://hdl.handle.net/11511/83099
23rd Signal Processing and Communications Applications Conference (16-19 May 2015)
Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

Discrete Relay Beamforming for Broadcasting with Relay Selection
Demir, Özlem Tuğfe; Tuncer, Temel Engin (2015-05-19)
In this paper, broadcast beamforming problem is considered in relay-assisted wireless networks. Two-phase relay communication is adopted. In the first phase, a source transmits common information to multiple relays which use amplify-and-forward relay protocol. Each relay multiplies its received signal by a complex weight and transmits it to the receivers. The amplitudes and phases of complex relay weights are chosen from discrete sets in order to decrease overhead for the feedback channel. Relay selection i...
OPTIMUM DISCRETE DISTRIBUTED BEAMFORMING FOR SINGLE GROUP MULTICASTING RELAY NETWORKS WITH RELAY SELECTION
Demir, Özlem Tuğfe; Tuncer, Temel Engin (2015-04-24)
In this paper, broadcast beamforming with relay selection is considered in wireless relay networks where there is no direct link between the source and the receivers. A source node transmits common information to many users employing multiple relays which use amplify-and-forward relay protocol. The channel state information is assumed to be available at a single relay to compute the relay weights and distribute them. Discrete relay weights are used due to several advantages including decreased overhead for ...
Interference suppression capability of faster than symbol rate sampling and frequency domain oversampling
Balevi, Eren; Yılmaz, Ali Özgür; Department of Electrical and Electronics Engineering (2016)
Detection of symbols in the presence of many interference sources is a difficult task in wireless channels. It is obligatory to reduce the interference for reliable communication. In this dissertation, minimum mean square error (MMSE) detection is investigated to suppress interference. Faster Than Symbol Rate (FTSR) sampling and Frequency Domain Oversampling (FDO) methods are proposed to enhance the interference suppression level of MMSE detection for both single user and multiuser communication. The aim of...
Interference alignment on multigroup multi way relay channels
Okutan, Mehmet Akif; Tuncer, Temel Engin; Department of Electrical and Electronics Engineering (2019)
Interference is a major problem for reliable multiuser communications. There are several ways to manage interference which are applied according to the power of interference compared to the power of desired signal. If interference is powerful than the desired signal then interference signal is decoded. Otherwise if it is much weaker than the desired signal it may be considered as noise. If signal powers of the desired signal and the interference are comparable then orthogonalizing all the signals from all t...
Modeling of time domain represented signals with multitone signals
Cansız, Gökhan; Demir, Şimşek; Department of Electrical and Electronics Engineering (2014)
Signals in certain systems, such as the transmitted signal in a cellular communication system, are strongly time dependent, non-deterministic and stochastically not well defined. Predicting the performance of the transmitter with such a signal at its input is important for efficient operation. Therefore, it is crucial to model a given time dependent waveform by multi-tone signals, which enables analytical derivations. In this thesis, multi-tone representation is employed to model the varying envelope arbitr...
Citation Formats
T. E. Tuncer, “Röle seçimi ile tüme gönderim için ayrık röle hüzme şekillendirme,” Malatya; Turkey, 2015, p. 2138, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83099.
METU IIS - Integrated Information Service open@metu.edu.tr