Investigation of evaporation from a sessile constant shape droplet

2017-08-31
Akkuş, Yiğit
Çetin, Barbaros
Dursunkaya, Zafer
Show full item record
115
views
0
downloads
https://hdl.handle.net/11511/83264
ASME International Conference On Nanochannels, Microchannels and Minichannels ( 27 - 31 Ağustos 2017)
Unverified, Conference / Seminar

Suggestions

Investigation of pattern formation in planar gas discharges
Uzun Kaymak, İlker Ümit; Rafatov, İsmail (null; 2014-04-25)
INVESTIGATION OF INTERSONIC FRACTURE IN HIGLY CURVED COMPOSITE LAMINATES UNDER QUASI-STATIC LOADING
Gozluklu, B.; Uyar, I; Çöker, Demirkan (2014-07-25)
In wind energy and aerospace industries, new advances in composite manufacturing technology enable to produce primary load carrying elements as composite materials in wide variety of shapes large such as an L-shape. However, due to the geometry, Interlaminar Normal Stresses (ILNS) are induced once a moderately thick laminate takes highly curved shape. In the curved part of the L-shaped structure, the development of ILNS promotes mode-I type of delamination propagation which is the weakest fracture mode. Thi...
Investigation of the particle breakage parameters in locked-cycle ball milling
Acar, Cemil; Hoşten, Çetin; Department of Mining Engineering (2012)
Size reduction processes, particularly fine grinding systems, in mineral processing and cement production plants constitute a great portion of energy consumption and operating costs. Therefore, the grinding systems should be designed properly and operated under optimum conditions to achieve productive and cost effective operations. The use of simulation based on kinetic mathematical models of grinding has proven useful in this respect. The kinetic models contain two essential parameters, namely, breakage ra...
Investigation of DC bus current harmonics in two and three level three-phase inverters
Ayhan, Ufuk; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2012)
Within scope of this work, double-fourier analysis method of rapid calculation and detailed simulation method, which are used to investigate DC bus current harmonics in two level and three level three-phase inverters systematically, will be emphasized and two methods will be compared via applying different modulation techniques. In addition, DC bus currents will be investigated visually for various working conditions and modulation methods. After that, analysis methods will be applied and harmonic spectrums...
Investigation of silver-induced crystallization of germanium thin films fabricated on different substrates
Kabacelik, Ismail; KULAKCI, MUSTAFA; Turan, Raşit (2015-06-01)
Silver-induced crystallizations of amorphous germanium (alpha-Ge) thin films were fabricated through electron beam evaporation on crystalline silicon (c-Si) (100), aluminum-doped zinc oxide (AZO), and glass substrates at room temperature. The solid-phase crystallization (SPC) of alpha-Ge films was investigated for various post-annealing temperatures between 300 and 500 degrees C for 60 min. Two crystallization approaches were compared: SPC and metal-induced crystallization (MIC). The structural properties o...
Citation Formats
Y. Akkuş, B. Çetin, and Z. Dursunkaya, “Investigation of evaporation from a sessile constant shape droplet,” presented at the ASME International Conference On Nanochannels, Microchannels and Minichannels ( 27 - 31 Ağustos 2017), 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83264.
METU IIS - Integrated Information Service open@metu.edu.tr