Katı atık düzenli depolama sahalarından farklı atık kompozisyonlarına göre gaz salınımlarının tahmini

Date

2017-10-05

Author

Karayılan, Sevde
Dursun Balcı, Derya
Aksoy, Ayşegül

Metadata

Show full item record

Item Usage Stats

143
views

0
downloads

URI

https://hdl.handle.net/11511/83810

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Preparation of clay-polymer nanocomposite for the retardation of waste water infiltration in landfill sites Bildiren, Mert; Günal Türkmenoğlu, Asuman; Department of Geological Engineering (2007) In this thesis study, the use of clay-polymer nanocomposites for their applicability in landfill sites as a product of retardation of waste water infiltration was evaluated. For this purpose, organophilic clays from HDTMA+ organic cation and nanocomposites of montmorillonite were prepared. The bentonite samples B1, B2 and B3 dominantly contain 2:1 layer montmorillonite and 1:1 interstratification of illite/smectite mixed layer as clay minerals. B1 is an unmodified yellow bentonite and B2 is a grey bentonite...
Katı Atık Yönetiminde Bölgesel Farklılıklar: İzmir Örneği Yetişkul Şenbil, Emine; Alişan, Onur; Özuysal, Ayşenur (2022-09-01)
Experimental study of solid propellant combustion instability Çekiç, Ayça; Ulaş, Abdullah; Department of Mechanical Engineering (2005) In this study, experimental investigation of solid propellant combustion instability using an end burning T-Burner setup is performed. For this purpose, a T-Burner setup is designed, analyzed, constructed and tested with all its sub components. T-Burner setup constructed is mainly composed of a base part, a control panel and the T-Burner itself. Combustion chamber, pressure stabilization mechanism, pressurization system, measurement instruments and data acquisition systems form the T-Burner. Pressure stabil...
Katı yakıtlı ısıtma sistemlerinde oluşan hava kirliliğinin tasarım değişikliği yoluyla azaltılması İleri, Arif; Vural, Hüseyin; Aydemir, Hasan(1992-08-01)
Non-reacting CFD analysis of a drop tube furnace used for solid fuel combustion Gülenç, Gamze; Kazanç Özerinç, Feyza; Department of Mechanical Engineering (2017) In this thesis, the flow inside the drop tube furnace (DTF) which was already built in the Clean Combustion Technologies Laboratory located in Department of Mechanical Engineering at Middle East Technical University is analysed by using Computational Fluid Dynamics method. DTF is a semi-pilot scale electrically heated reactor with the aim of achieving constant temperature zone to investigate combustion characteristics of solid fuels. A simplified geometry is created for the flow analysis inside the DTF. The...

Citation Formats

S. Karayılan, D. Dursun Balcı, and A. Aksoy, “Katı atık düzenli depolama sahalarından farklı atık kompozisyonlarına göre gaz salınımlarının tahmini,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83810.