Eksenel kesme ve moment yükü altındaki flanşlar için yapay sinir ağına dayalı cıvatalı flanş tasarım aracı geliştirilmesi

Date

2016-09-30

Author

Şanlı, Volakn
Akay, Ahmet Arda
Yıldırım, Alper
Gürses, Ercan
Çöker, Demirkan
Kayran, Altan

Metadata

Show full item record

Item Usage Stats

121
views

0
downloads

URI

https://hdl.handle.net/11511/83901

Conference Name

VI.Ulusal Havacılık ve Uzay Konferansı, UHUK (2016)

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Development of artificial neural network based design tool for aircraft engine bolted flange connection subject to combined axial and moment load Sanlı, Tahir Volkan; Kayran, Altan; Department of Aerospace Engineering (2018) In this thesis, a design tool using artificial neural network (ANN) is developed for the bolted flange connections, which enables the user to analyze typical aircraft engine connections subjected to combined axial and bending moment in a fast yet very accurate way. The neural network trained for the design tool uses the database generated by numerous finite element analyses for different combinations of parametric design variables of the bolted flange connection. The defined parameters are the number of bol...
Development of an axisymmetric, turbulent and unstructured navier-stokes solver Akdemir, Mustafa; Aksel, Mehmet Haluk; Department of Mechanical Engineering (2010) An axisymmetric, Navier-Stokes finite volume flow solver, which uses Harten, Lax and van Leer (HLL) and Harten, Lax and van Leer–Contact (HLLC) upwind flux differencing scheme for spatial and uses Runge-Kutta explicit multi-stage time stepping scheme for temporal discretization on unstructured meshe is developed. Developed solver can solve the compressible axisymmetric flow. The spatial accuracy of the solver can be first or second order accurate. Second order accuracy is achieved by piecewise linear recons...
Fiber reinforced polymer confined rc circularcolumns subjected to axial load and bending moment Doruk, Koray; Binici, Barış; Department of Civil Engineering (2006) Fiber reinforced polymers (FRPs) have gained increasing popularity in upgrades of reinforced structural elements due to high strength to weight ratio and ease of application. In this study, the effectiveness of the carbon reinforced polymer wrapping (CFRP) on ductility and strength of circular reinforced concrete columns, made of low strength concrete, is presented. Four circular reinforced columns with similar dimensions, longitudinal and confining steel reinforcement were tested under combined axial load ...
Comparison of axial flux and radial flux brushless dc motor topologies for control moment gyroscope wheel applications Yılmaz, Kurtuluş; Saranlı, Afşar; Department of Electrical and Electronics Engineering (2009) In this thesis axial flux and radial flux brushless dc motors will be studied as a drive motor for the control of moment gyroscope wheel. Design equations for axial flux and radial flux brushless dc motor topologies will be reviewed. Based on these equations radial and axial flux motors with different number of poles will be designed that meet control moment gyroscope wheel application requirements. The results will be evaluated in terms of efficiency, torque/mass and torque/volume, and suitability for the ...
An Axially extracted virtual cathode oscillator design and characterization Timur, Büşra; Demir, Şimşek; Department of Electrical and Electronics Engineering (2018) This thesis investigates axially extracted virtual cathode oscillator, which is one of the HPM sources, in several aspects. First, the cathode ring structure is defined, and effects of that structure are interpreted. Besides, the dependency between current density characteristics in the diode region of the studied vircator and the defined power conversion efficiency is shown. Moreover, the input characteristic of the vircator is examined in terms of the applied inlet voltage and corresponding inlet current....

Citation Formats

V. Şanlı, A. A. Akay, A. Yıldırım, E. Gürses, D. Çöker, and A. Kayran, “Eksenel kesme ve moment yükü altındaki flanşlar için yapay sinir ağına dayalı cıvatalı flanş tasarım aracı geliştirilmesi,” presented at the VI.Ulusal Havacılık ve Uzay Konferansı, UHUK (2016), Kocaeli, Türkiye, 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83901.