Synthesis and Characterization of Tin (IV) Oxide Coated Gold Nanoparticles

2017-10-22
Elci, Aylin
Nalbant Esentürk, Emren
Show full item record
77
views
0
downloads
https://hdl.handle.net/11511/85031
Unverified, Conference / Seminar

Suggestions

Synthesis and characterization of boron-doped Bi2O3-La2O3 fiber derived nanocomposite precursor
Durmusoglu, Senol; Uslu, Ibrahim; TUNÇ, TUNCAY; Keskin, Selda; Aytimur, Arda; Akdemir, Ahmet (Springer Science and Business Media LLC, 2011-11-01)
Boron doped poly(vinyl) alcohol/ bismuth - lanthanum acetate (PVA/Bi-La) nanofibers were prepared by electrospinning using PVA as a precursor. The effect of boron doping was investigated in terms of solution properties, morphological changes and thermal characteristics. The fibers were characterized by FT-IR, XRD, SEM and BET. The addition of boron did not only increase the thermal stability of the fibers, but also their diameters, which yielded stronger fibers. XRD analyses showed that boron doping increas...
Synthesis and characterization of nickel zinc oxide nanoparticles and their investigation as water oxidation catalyst
Ağcalı, Rahime Yağmur; Nalbant Esentürk, Emren; Department of Chemistry (2020-10)
The depletion of fossil fuels has steered attention to discover new energy sources. Fossil fuels are not desirable to use because of their hazardous effects on earth and being non-renewable, yet they have been used as primary energy sources all over the world. Due to their limited amount, the focus of research has become maintaining renewable, green, and clean energy. In this sense, among others hydrogen has a great potential for being a primary source. The possible supplied energy from hydrogen is gr...
Synthesis and Characterization of Bulk Amorphous Nanocrystalline Soft Magnetic Materials
Karataş, Merve; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (null; 2016-10-01)
(Fe36Co36B19.2Si4.8Nb4)99.25Cu0.75 bulk glassy rod with 3 mm diameter was synthesized by copper mold casting method and structural characterization of as cast sample was carried out. The non-isothermal differential scanning calorimetry (DSC) measurements were used for investigating the crystallization kinetics of the alloy. Kinetic parameters of process were determined by Kissinger and Ozawa methods. Isothermal DSC measurements ...
Synthesis and characterization of polystyrene clay nanocomposites
Özden, Gülsüm; Yılmazer, Ülkü; Department of Chemical Engineering (2004)
This study was undertaken to prepare polystyrene (PS)/montmorillonite (MMT) nanocomposites by different methods, including melt intercalation, in-situ polymerization and masterbatch methods. The in-situ polymerization method consisted of dispersing the styrene monomer into the galleries of MMT followed by subsequent polymerization. The PS/MMT nanocomposites formed by melt intercalation method were prepared on a twin-screw extruder. The masterbatch method was in fact a two-step process. As the first step, a ...
Synthesis and Characterization of Al RE TM Nanocrystal Amorphous Nanocomposites
Kalay, Yunus Eren (null; 2015-07-13)
Citation Formats
A. Elci and E. Nalbant Esentürk, “Synthesis and Characterization of Tin (IV) Oxide Coated Gold Nanoparticles,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85031.
METU IIS - Integrated Information Service open@metu.edu.tr