CFD Modeling and Analysis of a Small Shell and tube Heat Exchanger

2008-08-14
Özden, Ender
Tarı, İlker
A shell-and-tube heat exchanger is modeled and numerically analyzed using a commercial finite volume CFD package. The heat exchanger is small, has a single shell and a single tube pass, and its shell side is baffled. The baffles are 25% or 36% cut single-segmental baffles. Tube layout is the staggered layout with a triangular pitch. There is no leakage from baffle orifices and no gap between the baffles and the shell. It is observed that the shell side flow and the temperature distributions are very sensitive to modeling choices such as mesh, order of discretization and turbulence modeling. Various turbulence models are tried for the first and second order discretizations using two different mesh densities. CFD predictions of shell side pressure drop and overall heat transfer coefficient are obtained and compared with Kern and Bell-Delaware method results. After selecting the best modeling approach, the sensitivity of the results to flow rates and the baffle spacing is investigated. It is observed that the flow and temperature fields obtained from CFD simulations can provide valuable information about the parts of the heat exchanger design that need improvement. Correlation based approaches may indicate the existence of the weakness but CFD simulations can also pin point the source and the location of it. Using CFD together with experiments may speed up the design process and may improve the final design
ASME 2008 Summer Heat transfer Conference, (10 - 14 Ağustos 2008)

Suggestions

CFD MODELING AND ANALYSIS OF A SHELL-AND-TUBE HEAT EXCHANGER
Ozden, Ender; Tarı, İlker (2008-08-14)
A shell-and-tube heat exchanger is modeled and numerically analyzed using a commercial finite volume CFD package. The heat exchanger is small, has a single shell and a single tube pass, and its shell side is baffled. The baffles are 25% or 36% cut single-segmental baffles. Tube layout is the staggered layout with a triangular pitch. There is no leakage from baffle orifices and no gap between the baffles and the shell. It is observed that the shell side flow and the temperature distributions are very sensiti...
CFD analysis of a notebook computer thermal management solution
Yalçın, Fidan Seza; Tarı, İlker; Department of Mechanical Engineering (2008)
In this study, the thermal management system of a notebook computer is investigated by using a commercial finite volume Computational Fluid Dynamics (CFD) software. After taking the computer apart, all dimensions are measured and all major components are modeled as accurately as possible. Heat dissipation values and necessary characteristics of the components are obtained from the manufacturer's specifications. The different heat dissipation paths that are utilized in the design are investigated. Two active...
CFD ANALYSIS OF A NOTEBOOK COMPUTER THERMAL MANAGEMENT SOLUTION
YALCIN, Fidan S.; Sert, Cüneyt; Tarı, İlker (2008-08-14)
The thermal management system of a commercially available notebook computer is investigated by using a commercial finite volume Computational Fluid Dynamics (CFD) software. After taking the computer apart, all dimensions are measured and all major components are modeled as accurately as possible. Heat dissipation values and some characteristics of the components are obtained from the manufacturer's specifications. Different heat dissipation paths utilized in the design are investigated. Two active fans and ...
CFD MODELING OF FORCED COOLING OF COMPUTER CHASSIS
OZTURK, Emre; Tarı, İlker (2007-12-01)
In this study, Computational Fluid Dynamics, which has taken its position in the thermal design of electronic packages, was used in order to draw a CFD road map for forced cooling conjugate heat transfer analyses in heat generating electronic systems. The main sources of error in CM analyses arise from inappropriate numerical models including turbulence models, radiation modeling and discretization schemes, insufficient grid resolution, and lack of convergence. A complete computer chassis model with heat si...
CFD simulations and reduced order modeling of a refrigerator compartment including radiation effects
Bayer, Özgür; Paksoy, Akin; Aradağ Çelebioğlu, Selin (Elsevier BV, 2013-05-01)
Considering the engineering problem of natural convection in domestic refrigerator applications, this study aims to simulate the fluid flow and temperature distribution in a single commercial refrigerator compartment by using the experimentally determined temperature values as the specified constant wall temperature boundary conditions. The free convection in refrigerator applications is evaluated as a three-dimensional (3D), turbulent, transient and coupled non-linear flow problem. Radiation heat transfer ...
Citation Formats
E. Özden and İ. Tarı, “CFD Modeling and Analysis of a Small Shell and tube Heat Exchanger,” presented at the ASME 2008 Summer Heat transfer Conference, (10 - 14 Ağustos 2008), Jacksonville, Amerika Birleşik Devletleri, 2008, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85291.