Effects of Different Cellulose Ethers on White Cement Based Ceramic Adhesives

2018-09-14
Tangüler Bayramtan, Meltem
Aleessa Alam, Burhan
Yaman, İsmail Özgür
Show full item record
90
views
0
downloads
https://hdl.handle.net/11511/85378
13th International Congress on Advances in Civil Engineering, (12 - 14 Eylül 2018)
Unverified, Conference / Seminar

Suggestions

Effects of Ingredients on Thermal and Mechanical Properties of Acrylic Bone Cements
Endoğan Tanır, Tuğba; Hasırcı, Nesrin (2009-09-15)
There is a very delicate relation between the amounts of all the ingredients present in the cement composition and the properties of the product. In this study, homogeneous poly(methyl methacrylate) (PMMA) microspheres were prepared by suspension polymerization technique, and used in cement formulations. Various acrylic cements with different compositions were prepared by using PMMA microspheres, methyl methacrylate (MMA) monomer, radiopaque agent of barium sulfate (BaSO4), inorganic particles of hydroxyapa...
Effects of different batter formulations on physical and chemical properties of microwave and conventionally fried chicken fingers
Barutçu Mazı, Işıl; Şahin, Serpil; Department of Food Engineering (2009)
The main objective of this study was to determine the effects of batters containing various flour types and frying methods on physical and chemical properties of chicken fingers. To determine the effects of different flour types, 30 % of the corn and wheat flour mix in control batter was replaced with chickpea, rice or soy flours. Frying was performed in microwave oven at 365 W (70 %) power level and at 1801°C for different times. Samples were also fried in a conventional fryer at 1801°C for comparison. T...
Effects of titanate coupling agents on low density polyethylene and polypropylene blends and composites
Yılmaz, Gökhun; Bayramlı, Erdal; Department of Polymer Science and Technology (2008)
The objective of this study is to investigate the effects of titanate coupling agents on low density polyethylene (LDPE) and polypropylene (PP) blends and composites in terms of their mechanical and morphological properties. PP and LDPE composites were produced separately in a Brabender internal mixer, and CaCO3 was used as inorganic filler with compositions of 20, 40 and 60 %. PP/LDPE blends were produced in a twin-screw extruder with ratios of 75/25, 50/50 and 25/75. Their composites were prepared with ad...
Effects of a high-calcium and a low-calcium fly ash on the properties of portland cement fly ash pastes and mortars.
Tokyay, Mustafa; Erdoğan, Turhan Y.; Department of Civil Engineering (1987)
Effects of Al and Fe additions on microstructure and mechanical properties of SnAgCu eutectic lead-free solders
KANTARCIOGLU, A.; Kalay, Yunus Eren (2014-01-21)
In this study, Sn-3.5Ag-0.9Cu (wt%) lead-free solder was modified with minor additions of Al and Fe. The thermal, microstructural and mechanical behaviors after and before compositional modifications were investigated by a combined study of differential scanning calorimetry (DSC), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and shear strength measurements. EDS results and Darken-Gurry predictions indicated a high concentration of Fe substitution within the Cu6Sn5 at the solder/c...
Citation Formats
M. Tangüler Bayramtan, B. Aleessa Alam, and İ. Ö. Yaman, “Effects of Different Cellulose Ethers on White Cement Based Ceramic Adhesives,” presented at the 13th International Congress on Advances in Civil Engineering, (12 - 14 Eylül 2018), 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85378.
METU IIS - Integrated Information Service open@metu.edu.tr