An investigation into power and energy requirements for the auxiliary components of a CNC lathe

2016-07-12
Uluer, Muhtar Ural
Akkök, Metin
Show full item record
154
views
0
downloads
http://umtik.com/2016/Home.htm
https://hdl.handle.net/11511/85553
The 17th International Conference on Machine Design and Production, (12 - 15 Temmuz 2016)
Graduate School of Natural and Applied Sciences, Conference / Seminar

Suggestions

An investigation into the loading of parts into an FMS with cyclic schedules
Özlü, Sinan; Kılıç, S. Engin; Department of Mechanical Engineering (1998)
AN INVESTIGATION INTO THE ELECTROCHEMICAL PRODUCTION OF Si BY THE FFC CAMBRIDGE PROCESS
ERGUL, Emre; Karakaya, İshak; Erdoğan, Metehan; ERDEN, Fuat (2012-03-15)
The FFC Cambridge process was suggested as a promising Si production technique for the expanding solar energy industry. Direct electrochemical reduction of bulk SiO2 plates and porous SiO2 pellets in molten CaCl2-NaCl salt mixture were investigated at 750 degrees C by applying 2.8 V potential difference. The produced Si powder was brown and found to be contaminated by the Ni and stainless steel plates used as the cathode contacting materials. The reduction rates of the bulk SiO2 plates and porous SiO2 pelle...
An Investigation of the Kinetics and Oxidative Thermodegradation Properties of Waste Telephone Pole Samples Treated with Metal Salts
Yorulmaz, S. Y.; Atımtay, Aysel (2013-12-02)
In the present study, combustion mechanisms, activation energy, and exponential constants were investigated for natural pine and acid copper chromate impregnated telephone pole. Oxidative thermodegradation was carried out in air environment at different heating rates by using thermogravimetric analysis. In order to calculate thermal kinetics, the Coats Redfern method was used. There were less flammable products, lower weight losses in the main oxidation region, a decrease in the maximum weight loss temperat...
An investigation on losses and deviations in axial flow compressors.
Çetin, Mete; Department of Mechanical Engineering (1985)
An investigation on the use of perlites in structural and insulating lightweight concretes and in masonry units.
Timuçin, Sumru; Department of Civil Engineering (1971)
Citation Formats
M. U. Uluer and M. Akkök, “An investigation into power and energy requirements for the auxiliary components of a CNC lathe,” Bursa, Türkiye, 2016, vol. 2, p. 611, Accessed: 00, 2021. [Online]. Available: http://umtik.com/2016/Home.htm.
METU IIS - Integrated Information Service open@metu.edu.tr