Selection of Seismic Isolation Properties for Bridges in Near Fault Regions

2010-09-27
Dicleli, Murat
Show full item record
61
views
0
downloads
https://hdl.handle.net/11511/85630
9th International Congress on Advances in Civil Engineering, (27 Eylül 2010)
Unverified, Conference / Seminar

Suggestions

Selection of Ground Motion Prediction Equations for Probabilistic Seismic Hazard Assessments of the Izmit Bay Bridge
Li Destri Nicosia, Giovanni; Gülerce, Zeynep (null; 2016-09-09)
This study investigates the effects of using global and regionalized ground motion prediction equations (GMPEs) developed for shallow crustal and active tectonic regions on the outcomes of probabilistic seismic hazard assessment (PSHA) for the target region (Gülerce and Abrahamson, 2014). We selected the PSHA conducted for the Izmit Bay Bridge (Chacko et al., 2014) which employed the global Next Generation Attenuation (NGA)-W1 GMPEs (Power et al., 2008) in the original version as the case study. Gülerce et ...
Evaluation of low-temperature test methods for elastomeric bridge bearings
Yakut, Ahmet (American Society of Civil Engineers (ASCE), 2002-01-01)
Evaluation of pushover analysis procedures for frame structure
Oğuz, Sermin; Yakut, Ahmet; Department of Civil Engineering (2005)
Pushover analysis involves certain approximations and simplifications that some amount of variation is always expected to exist in seismic demand prediction of pushover analysis. In literature, some improved pushover procedures have been proposed to overcome the certain limitations of traditional pushover procedures. The effects and the accuracy of invariant lateral load patterns utilised in pushover analysis to predict the behavior imposed on the structure due to randomly selected individual ground motions...
Evaluation of disparity map characteristics for stereo image coding
Aksay, A; Bici, MO; Akar, Gözde (2005-09-14)
In order to compress stereo image pairs effectively, disparity compensation is the most widely used method. In this paper we examined the effects of using different disparity maps and their properties in an embedded JPEG2000 based disparity compensated stereo image coder. These properties include the block size, estimation method and the resulting entropy of the disparity map. Experimental results show that basic block matching gives better results than ground truth, especially on occluded regions and bound...
Evaluation of test methods for measuring adhesionbetween a liner and rock
Tannant, Dd; Öztürk, Hasan (2003-08-26)
The adhesive strength between a thin spray-on liner and rock is an important property controlling the design and performance of spray-on liner support systems. A review is presented of the various adhesion test methods used by the coatings, microelectronics and concrete industries. The advantages and disadvantages of these test methods with respect to thin spray-on liners are discussed. From this review and past experience measuring adhesion between thin spray-on liners and rock, a suggested test method ...
Citation Formats
M. Dicleli, “Selection of Seismic Isolation Properties for Bridges in Near Fault Regions,” presented at the 9th International Congress on Advances in Civil Engineering, (27 Eylül 2010), Trabzon, Türkiye, 2010, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85630.
METU IIS - Integrated Information Service open@metu.edu.tr