INVESTIGATION OF DEEP EUTECTIC SOLVENTS AS REACTION MEDIUM FOR METAL CHLORIDE BASED CHEMICAL HEAT PUMPS

2018-09-01
Deep eutectic solvents (DES) are regarded as a new generation of ionic solvents with their unique properties in energy efficiency, safety, cost and environmental friendliness.[1] Theyare systems formed from a eutectic mixture of LewisorBrònsted acidsand bases which contain hydrogen bonding.[2] Due to their low vapor pressure, these liquids do not produce volatile organic compounds (VOC), and therefore are referred to be green solvents. The major aim of this study is to examine deep eutectic solvents as reaction media for calcium-ammonia chemical heat pumps. Firstly, ZnCl2-urea deep eutectic solvents were prepared with different molar ZnCl2-urea ratios between 3.5:10, 3:10, and 2.5:10. FTIR analysis was carried out to verify the formation of DESs. Next, the stability and lifetime of DESs samples were determined. The most stable deep eutectic solvent was observed as the sample with 3.5:10 ZnCl2-urea ratio, with a lifetime of 30 days. The melting points of the samples were determined by DSC analysis which vary between -20°C and -40°C depending on the ZnCl2:urea ratio, while the pure ZnCl2 and urea melting points are 290°C and 133°C, respectively. In order to determine the solubility of CaCl2 in the DES, the 3.5:10 ZnCl2-urea ratio DES sample was saturated with CaCl2 and the calcium concentration in clear solution was determined by Induced Coupled Plasma (ICP) and Atomic Absorption as 5% by weight. The reaction tests were conducted in a visible pressure chamber to determine the ammonia complexation capacity of the CaCl2 containing 3.5:10 ZnCl2-urea ratio DES sample and the results were compared with those of pure DES sample, ZnCl2, and CaCl2. It was observed that the ammonia reaction with ZnCl2 takes place in DES as well as with pure CaCl2 but with the DES-CaCl2 suspension the reaction capacity is significantly higher than both. During the experiments, phase segregation was observed both in ammonia-reacted DES and DES-CaCl2 suspension. FTIR analysis was carried out to see the reacted ammonia peaks and the change in the functional groups in the upper phase and in the lower phase. No significant difference was observed in the chemical contents of both phases. In addition, thermogravimetric analyses were performed in nitrogen atmosphere to determine the adsorption enthalpy of ammonia in the DES-CaCl2 solutions, which was estimated as 17 J/g. [1] Zhang, Q., De Oliveira Vigier, K., Royer, S. and Jérôme, F. (2012). Chemical Society Reviews,Deep eutectic solvents: syntheses, properties and applications, 7108-7146. Normal 0 false false false TR X-NONE X-NONE [ 2] Smith, E., Abbott, A., & Ryder, K. (2014). Chemical Reviews, Deep Eutectic Solvents (DESs) and Their Applications,11060-11082. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri",sans-serif; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:TR;}

Suggestions

Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Yılmaz, Olgun; Karakaya, İshak (2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings
Yılmaz, Olgun; Karakaya, İshak (2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings, Metal-Matrix Composites Innovations, Advances and Applications
Yılmaz, Olgun; Karakaya, İshak (null; 2018-03-15)
Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al<SUB>2</SUB>O<SUB>3</SUB> particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Development of graphene oxide based aerogels
Doğan, Öznur; Bat, Erhan; Department of Chemical Engineering (2017)
Owing to their large surface area, high hydrophobicity and porous structure, graphene oxide based aerogels have been proposed as feasible and economic solutions for the increasing water pollution caused by crude oils, petroleum products and toxic organic solvents. In this study, graphene oxide based aerogels were prepared via two different routes. In the first route, random copolymers of glycidyl methacrylate and styrene were used as crosslinkers in the aerogel. In the second route, 1,3-diaminopropane was u...
Development of a laccase based paper biosensor for the detection of phenolic compounds
Öktem, Hüseyin Avni; EYİDOĞAN, FÜSUN; Bayrac, Ceren; Yilmaz, Remziye (2012-04-01)
Laccase (E.C.1.10.3.2, p-benzenediol: oxygen oxidoreductase) catalyzes the oxidation of various aromatic compounds, particularly phenols, which are organic pollutants, present in wastewater. With this specific function this enzyme has had a great impact on the development of biosensors for both environmentally important pollutants and clinically relevant metabolites. There are different detection procedures such as chromatographic and spectrophotometric methods to detect the presence of phenolic compounds i...
Citation Formats
E. Gözde, Ç. Dilek Hacıhabiboğlu, and G. Karakaş, “INVESTIGATION OF DEEP EUTECTIC SOLVENTS AS REACTION MEDIUM FOR METAL CHLORIDE BASED CHEMICAL HEAT PUMPS,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85976.