An Experimental Investigation of Infill Behaviour in RC Frames



An experimental investigation of partially prestressed concrete beam behaviour.
Al-Ghabrah, Mumtaz; Department of Civil Engineering (1985)
An Experimental study on static and dynamic behaviour of model pile foundations
Ünsever, Yeşim Sema; Özkan, M. Yener; Department of Civil Engineering (2015)
When the subsoil beneath a structure is weak to carry the loads from the superstructure, use of piled foundations is one of the widely employed alternatives. These types of foundations may also be subjected to transient or cyclic lateral loads arising from earthquake, wind, etc. Detailed case histories of dynamically loaded pile foundations are not too many in the literature. In this study, a series of static cyclic horizontal load tests and 1-g shaking table tests on various model foundations, such as pile...
An experimental investigation of part load problems in centrifugal pumps
Ali, Nasir Waquar; Eralp, O. Cahit; Department of Mechanical Engineering (1989)
An Investigation on belief propagation decoding of polar codes
Doğan, Orkun; Diker Yücel, Melek; Department of Electrical and Electronics Engineering (2015)
Polar codes are provably symmetric capacity achieving codes for any given binary input discrete memoryless channel, with low encoding and decoding complexities. Polar codes introduced by Erdal Arıkan in 2009 are based on the channel polarization. N binary channels are synthesized out of N copies of binary input discrete memoryless channels, such that as N goes to infinity each of the synthesized channel’s capacity goes to either 0 or 1; i.e., the channels are seen purely as noisy or noiseless channels. Thes...
An investigation of the relationship between compressive strength and dust generation potential of magnetite pellets
SİVRİKAYA, OSMAN; Arol, Ali İhsan (Elsevier BV, 2013-09-10)
Iron ore pellets should have sufficient mechanical strengths against degradation at all stages of pellet production in pelletizing plants. Besides the strength, pellets should have less dust emission during operation since the process efficiency and the pelletizing equipments are adversely affected by dust. Dust is also a problem for sintered (product) pellets since they abrade during transportation from pellet production site to the reduction facilities. Sufficient mechanical strength and low dust emission...
Citation Formats
İ. O. Demirel, A. Yakut, B. Binici, and E. Canbay, “An Experimental Investigation of Infill Behaviour in RC Frames,” 2015, Accessed: 00, 2021. [Online]. Available: