Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Open Access Guideline
Open Access Guideline
Postgraduate Thesis Guideline
Postgraduate Thesis Guideline
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Effect of inlet pressure on crude oil combustion -laboratory approach-
Date
2021-03-01
Author
Kök, Mustafa Verşan
Nurgaliev, Danis K.
Metadata
Show full item record
This work is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
.
Item Usage Stats
293
views
0
downloads
Cite This
In this research, the effect of inlet pressure on combustion behavior of medium and light crude oils was analyzed with TGA and DSC experiments. The ramped temperature combustion experiments were performed at constant heating rates under air atmosphere. TGA curves revealed three main reaction regions known as low temperature oxidation (LTO), fuel deposition (FD), and high temperature oxidation (HTO). In DSC curves, at the early stage of the heating, distillation region was also observed in addition to LTO and HTO reaction regions. It was observed that the changes in inlet pressure affect the temperature intervals of the reaction regions and peak temperatures. The kinetic parameters were calculated according to Ozawa-Flynn-Wall (OFW), Kissinger-Akahira-Sunose (KAS), and ASTM methods. Results indicated that the increase in inlet pressure increased in the activation energy.
Subject Keywords
Fuel Technology
,
Geotechnical Engineering and Engineering Geology
URI
https://hdl.handle.net/11511/88649
Journal
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
DOI
https://doi.org/10.1016/j.petrol.2020.108174
Collections
Department of Petroleum and Natural Gas Engineering, Article
Suggestions
OpenMETU
Core
The effect of water on combustion behavior of crude oils
Kök, Mustafa Verşan; Nurgaliev, Danis K. (Elsevier BV, 2020-03-01)
The ramped temperature oxidation experiments were performed on heavy and light crude oil samples using the TGA and DSC instruments. The crude oils were mixed with different weight percentages (10%, 20%, and 30%) of water, as a result of which six different water-oil mixtures were prepared. The samples were heated up to 800 degrees C with three heating rates 20, 25, 30 degrees C/min. Two reaction regions, particularly the low temperature oxidation (LTO) and high temperature oxidation (HTO), were identified i...
Effect of pressure on combustion kinetics of heavy oils
Bağcı, Ali Suat (Informa UK Limited, 2005-07-01)
In this study, 16 experiments were conducted to study the effects of pressure on crude oil oxidation in limestone medium. Karakus (29 degrees API), Beykan (32 degrees API), Bati Raman (12 degrees API), Camurlu ( 12 degrees API), Adiyaman (26 degrees API), Garzan (28 degrees API) and Raman (18 degrees API) crude oil from Turkish oil fields were used. The mixture of limestone and the crude oil was subjected to a controlled heating schedule under a constant flow rate of air. The produced gas was analyzed for i...
Effect of heating rate on thermal properties and kinetics of raw and cleaned coal samples
Özbas, Kazim Esber; Hicyilmaz, Cahit; Kök, Mustafa Verşan (Informa UK Limited, 2003-01-01)
In this article, thermogravimetry (TG/DTG) was used to determine the effect of heating rate on the thermal properties and kinetics of raw and cleaned coal samples from Soma, Tuncbilek, and Afsin Elbistan regions. TG/DTG experiments were carried out at 4 different heating rates (5, 10, 15, and 20degreesC/min). Generally, for all of the samples higher peak and burnout temperatures were measured with an increasing heating rate. Kinetic parameters of the samples were determined using an Arrhenius-type kinetic m...
Effect of heat treatment on grindabilities of celestite and gypsum and separation of heated mixture by differential grinding
Sener, S; Bilgen, S; Ozbayoglu, G (Elsevier BV, 2004-03-01)
This study was conducted to determine thermal decomposition of gypsum (CaSO4 . 2H(2)O) and celestite (SrSO4), to examine the effect of heating on grindability and the possibility of celestite-gypsum separation by differential grinding after heating. The results indicated that no significant decomposition reaction was observed in celestite up to 900 degreesC whereas the decomposition of gypsum occurred within 100-450 degreesC.
Influence of coal briquette size on the combustion kinetics
Altun, Naci Emre; Bagci, AS (Elsevier BV, 2004-08-15)
In this study, the effects of one of the most important parameters in coal briquetting process, the briquette size, on the combustion behaviour of coal briquettes were determined from the view of combustion kinetics, i.e. their liability to ignite and combust. Effect of size on the combustion kinetics was treated by two different approaches. The first one consists of combustion kinetics experiments with briquettes of increasing sizes, thus of expanding volumes. In the second phase, briquette dimensions were...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
M. V. Kök and D. K. Nurgaliev, “Effect of inlet pressure on crude oil combustion -laboratory approach-,”
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING
, pp. 0–0, 2021, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/88649.