Technical and Economic Analyses for Sizing PV Power Plant With Storage System for METU NCC

Date

2015-11-19

Author

Sadati, S M Sajed
Jahani, Elham
Taylan, Onur

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

102
views

0
downloads

URI

http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/IMECE2015-50959
https://hdl.handle.net/11511/89341

DOI

https://doi.org/10.1115/imece2015-50959

Conference Name

Volume 6B: Energy

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

TECHNICAL AND ECONOMIC ANALYSES FOR SIZING PV POWER PLANT WITH STORAGE SYSTEM FOR METU NCC Sadati, S. M. Sajed; Jahani, Elham; Taylan, Onur (2015-11-19) The use of renewable energy with storage systems is particularly important in small and unreliable grids, such as islands. This paper reports sizing of a photovoltaic (PV) power plant with storage system for Middle East Technical University Northern Cyprus Campus through technical and economic analyses. PV system was modeled considering fixed tilted, one axis and two-axis tracking systems using hourly data. Energy storage system was included in the model to overcome the temporal mismatch between the electri...
Technical and economical evaluations of ferrocement technology for housing purposes in the conditions of Turkey Özarslan, H. Tahsin; Erant, Engin; Department of Civil Engineering (1989)
Technical and economical evaluation of ferrocement technology in Turkey with emphasis of roof covering and walls. Alacal, Muammer; Department of Civil Engineering (1985)
Technical and economic aspects of solar space heating in Turkey Taşdemiroǧlu, Ersoy; Awad, Mostafa F. Shaaban (Elsevier BV, 1990-11) A computer analysis of solar heating has been performed for Turkey. Results are presented for two prototype buildings using either fuel-oil or coal under different heating loads in three climatic regions (Antalya, Ankara and Kars). Cumulative cost flows are compared for the life-cycle present value technique. Optimum design magnitudes are determined for maximum life-cycle savings. The payback period for capital invested in a solar system, internal rate of return, and total savings are found for the optimum ...
TECHNICAL AND ECONOMIC-FEASIBILITY OF CONVERSION TO A HIGHER VOLTAGE DISTRIBUTION OZAY, N; Güven, Ali Nezih; TURELI, A; DEMIROGLU, M (Institution of Engineering and Technology (IET), 1995-09-01) The proper selection of the voltage level combinations when uprating voltages in an existing distribution system is very important as this would result in significant economics. The paper discusses the effects of high-voltage and distribution system primary voltage on the system characteristics and performance as practised in the Turkish system. It is shown that a higher primary distribution voltage minimises the investments on the high-voltage system and a completely new primary distribution system provide...

Citation Formats

S. M. S. Sadati, E. Jahani, and O. Taylan, “Technical and Economic Analyses for Sizing PV Power Plant With Storage System for METU NCC,” presented at the Volume 6B: Energy, Houston, Texas, USA, Amerika Birleşik Devletleri, 2015, Accessed: 00, 2021. [Online]. Available: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/IMECE2015-50959.