Investigation of SiO /p-Si structure by DLTS and various admittance techniques

Download
035728.pdf
1994
Özder, Serhat
Show full item record
97
views
0
downloads
Metal oxide silicon, Silicon, Mercury probes
https://hdl.handle.net/11511/904
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production and electrical characterization of metal and polysilicon gata MOS structures.
Mutlugil, Bülent; Katırcıoğlu, Bayram; Department of Physics (1992)
Experimental research on in-tube condensation under steady-state and transient conditions
Tanrikut, A; Yesin, O (2005-01-01)
In this research study, in-tube condensation in the presence of air was investigated experimentally at a heat exchanger of countercurrent type for different operating conditions. The test matrix for the steady-state condition covers the range of pressures P = 1.8 to 5.5 bars, vapor Reynolds numbers Re, = 45 000 to 94 000, and inlet air mass fraction values Xi = 0 to 52%. The effect of air manifests itself by a reduction in the local heat flux and the local heat transfer coefficient. The local heat transfer ...
Estimation of the formation temperature from the inlet and outlet mud temperatures while drilling geothermal formations
Tekin, Sema; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2010)
Formation temperature is an important parameter in geothermal drilling since it affects all the components of the system such as drilling fluid, drilling operations and equipment through mud temperatures. The main objective of this study is to estimate the formation temperatures of five geothermal wells in Germencik-Ömerbeyli geothermal field by using inlet and outlet mud temperatures obtained during drilling. For this purpose, GTEMP, a wellbore thermal simulation model is used to simulate the process of dr...
Optimization of mechanical and microstructural properties of weld joints between aluminium - magnesium and aluminium - magnesium - silicon alloys with different thicknesses
Ekşi, Murat; Ögel, Bilgehan; Batıgün, Caner; Department of Metallurgical and Materials Engineering (2012)
For the last decades usage of aluminium alloys have been increasing tremendously. They have been used in aerospace industry widely and now aluminium alloys are becoming more and more popular in automotive and defense industries. Consequently; successful welding of aluminium alloys gains importance. In this study a research is carried out on eldability of plates having different thicknesses of composition 5754 aluminium and 6063 aluminium in T-fillet geometry using Gas-metal Arc Welding technique. It was aim...
Comparison of terahertz technologies for detection and identification of explosives
Beigang, Rene; Biedron, Sandra G.; Dyjak, Slawomir; Ellrich, Frank; Haakestad, Magnus W.; Huebsch, Daniel; Kartaloglu, Tolga; Ozbay, Ekmel; Ospald, Frank; Palka, Norbert; Puc, Uros; Czerwinska, Elzbieta; Sahin, Asaf B.; Sesek, Aleksander; Trontelj, Janez; Svigelj, Andrej; Altan, Hakan; van Rheenen, Arthur D.; Walczakowski, Michal (2014-05-06)
We present results on the comparison of different THz technologies for the detection and identification of a variety of explosives from our laboratory tests that were carried out in the framework of NATO SET-193 “THz technology for stand-off detection of explosives: from laboratory spectroscopy to detection in the field” under the same controlled conditions. Several laser-pumped pulsed broadband THz time-domain spectroscopy (TDS) systems as well as one electronic frequency-modulated continuous wave (FMCW) d...
Citation Formats
S. Özder, “Investigation of SiO /p-Si structure by DLTS and various admittance techniques,” Ph.D. - Doctoral Program, Middle East Technical University, 1994.
METU IIS - Integrated Information Service open@metu.edu.tr