İnce daneli zeminlerde tekrarlı birim deformasyonların olasılıksal belirlenmesi

Date

2007-10-20

Author

Bilge, Habib Tolga
Çetin, Kemal Önder

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

65
views

0
downloads

URI

https://hdl.handle.net/11511/92528

Conference Name

Altıncı Ulusal Deprem Mühendisliği Konferansı

Collections

Department of Music and Fine Arts, Conference / Seminar

Suggestions

OpenMETU
Core

Cyclic volumetric and shear strain responses of fine-grained soils Bilge, Habib Tolga; Çetin, Kemal Önder; Department of Civil Engineering (2010) Although silt and clay mixtures were mostly considered to be resistant to cyclic loading due to cohesional components of their shear strength, ground failure case histories compiled from fine grained soil profiles after recent earthquakes (e.g. 1994 Northridge, 1999 Adapazarı, 1999 Chi-Chi) revealed that the responses of low plasticity silt and clay mixtures are also critical under cyclic loading. Consequently, understanding the cyclic response of these soils has become a recent challenge in geotechnical ea...
İnce daneli zeminlerde tekrarlı yükleme sebepli hacim birim deformasyonların değerlendirilmesi Bilge, Habib Tolga; Çetin, Kemal Önder (2010-10-01)
Deposition and testing of thin film hydrogen separation membranes Pişkin, Fatih; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2013) Industrial production of hydrogen from the syngas, generated from steam reformation of natural gas or coal gasification, sets conditions for hydrogen separation membranes in terms of operating conditions. An alternative source for hydrogen is a syngas generated by gasification of municipal solid wastes which are likely to set more stringent conditions for the separation membranes. There is therefore, a growing demand for separation membranes with improved permeability and particularly of low cost. Among var...
Modeling and optimization of PECVD processes and equipment used for manufacturing thin film photovoltaic devices Özkol, Engin; Kıncal, Serkan; Department of Chemical Engineering (2014) Plasma enhanced chemical vapor deposition (PECVD) is a common technique used in thin film based device fabrication. Operation conditions of a PECVD reactor need to be optimized in terms of deposition conditions as well as plasma cleaning procedures to deliver desired deposited material qualities. In addition, interactions with external support systems such as gas lines and cabinet, compressors and utility production units need to be understood and characterized. Modeling, whether based on fundamental princi...
İnce Film Silisyum Güneş Gözelerinin Tasarımı ve Kimyasal Aşındırma İle Elde Edilmiş Silisyum Pulları Üzerine Üretilmesi Yerci, Selçuk(2015-12-31) Silisyum (Si) güneş gözeleri fotovoltaik endüstrisinin yüzde doksanından fazlasına hâkimdir. Silisyumun bu başarısının arkasında yüksek kaliteye sahip silisyum tek kristalinin uygun maliyetle üretilebilmesi, silisyumun ideale yakın bant aralığının olması ve Si p-n ekleminin kolaylıkla üretilebilmesidir. Bunların yanı sıra silisyumun ışık soğurma katsayısının küçük olması ve dolayısıyla Si güneş gözelerinin göreceli olarak kalın olması ise silisyumun en önemli zaafıdır. Kullanılan kalın malzeme (~200 um), Si...

Citation Formats

H. T. Bilge and K. Ö. Çetin, “İnce daneli zeminlerde tekrarlı birim deformasyonların olasılıksal belirlenmesi,” presented at the Altıncı Ulusal Deprem Mühendisliği Konferansı, İstanbul, Türkiye, 2007, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92528.