Darbeli Kırmataş Kolonlardaki Grup Etkisinin 3-B Sonlu Elemanlar Yöntemi ile Değerlendirilmesi

Oner, Lale
Kurt Bal, Ece
Çetin, Kemal Önder
Zemin Mekaniği ve Geoteknik Mühendisliği 16. Ulusal Konferansı


Darbeli Kırmataş Kolonlar® (DKK) ile İyileştirilen Liman Sahasında Alan Yükleme Deneyi İle Oturma Davranışının Gözlemlenmesine İlişkin Vaka Analizi
Çetin, Kemal Önder; Öner, Lale (2017-11-24)
Within the confines of this paper, a comparative assessment of the estimated and monitored settlements of container port site is presented. The site was improved by Impact Rammed Aggregate Pier® (RAP) System. The main goal of the in-situ soil improvement was defined as to establish a homogeneous rigid crust beneath the foundation. This crust layer is believed to improve soil liquefaction resistance and reduce the settlements under static and seismic loading. Additionally, the differential settlements are to...
Darbeli kırmataş kolon (dkk) elemanlarının deformasyon temelli tasarımı
Kurt Bal, Ece; Öner, Lale; Çetin, Kemal Önder (2013-12-07)
Darbeli kırmataş kolon (dkk) yükleme testi sonuçlarının değerlendirilmesi
Kurt Bal, Ece; Çetin, Kemal Önder (2012-10-05)
Nonuform pulse repetition interval optimization for pulse doppler radars
Mercan, Hasan; Tanık, Yalçın; Department of Electrical and Electronics Engineering (2004)
In this thesis, a method of optimization of nonuniform pulse repetition interval for pulse Doppler radars is investigated. PRI jittering technique is used for the selection of inter-pulse intervals. An environment with white Gaussian noise and clutter interference is defined and applying generalized likelihood ratio test, a sufficient statistic function for the detection of the target is derived. The effect of jitter set selection on range and Doppler ambiguity resolution and clutter rejection is investigat...
Impact modified polyamide-organoclay nanocomposites
Işık, Işıl; Yılmazer, Ülkü; Department of Chemical Engineering (2007)
The effects of melt state compounding and addition order of ethylene-butyl acrylate-maleic anhydride (E-BA-MAH), ethylene-glycidyl methacrylate (E-GMA), ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) terpolymer and/or three types of organoclays (Cloisite® 15A, 25A and 30B) on morphology, thermal, mechanical and dynamic mechanical properties of polyamide-6 are investigated. XRD patterns show that the interlayer spacing for Cloisite® 15A remained unchanged; however it increased for the organoclays ...
Citation Formats
L. Oner, E. Kurt Bal, and K. Ö. Çetin, “Darbeli Kırmataş Kolonlardaki Grup Etkisinin 3-B Sonlu Elemanlar Yöntemi ile Değerlendirilmesi,” presented at the Zemin Mekaniği ve Geoteknik Mühendisliği 16. Ulusal Konferansı, Erzurum, Türkiye, 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92757.