Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Open Access Guideline
Open Access Guideline
Postgraduate Thesis Guideline
Postgraduate Thesis Guideline
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
Rüzgar Türbinleri için Yenilikçi Uyarlanabilir bir Zarf Koruma Sisteminin Geliştirilmesi ve Farklı Rotor Çaplarındaki Türbinler Üzerinde Simülasyon Testleri
Date
2021-09-23
Author
Şahin, Mustafa
Yavrucuk, İlkay
Metadata
Show full item record
This work is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
.
Item Usage Stats
339
views
0
downloads
Cite This
URI
http://www.ruzgarsempozyumu.org/wp-content/uploads/2021/09/2011-012.pdf
https://hdl.handle.net/11511/93947
Conference Name
6. İzmir Rüzgar Sempozyumu
Collections
Center for Wind Energy (RÜZGEM), Conference / Seminar
Suggestions
OpenMETU
Core
Rüzgar Türbinlerinin Dinamik Modellenmesinde Belirli Parametrelerin Güç Eğrisi Tahminine Etkilerinin İncelenmesi
Şahin, Mustafa; Yavrucuk, İlkay (2017-11-03)
Design of a modular, axial-flux direct drive permanent magnet generator for wind turbines
Başkaya, Aydın; Keysan, Ozan; Department of Electrical and Electronics Engineering (2018)
Wind energy technology is becoming more important issue in terms of renewable energy applications. Theoretical maximum of wind energy utilization is known (which is predetermined by Betz as 59%) and generally imperfections in blade manufacture reduce the actual energy yield of the turbine less than the useable energy. Therefore, maximum energy yield from generator topology is desired. According to fault statistics of wind turbines, most of the cases are related to gearbox failures. Mechanical losses and hea...
Investigation of inertial support limits in wind turbines and the effects on the power system stability
Duymaz, Erencan; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019)
In this study, the inertial support implementation is studied for variable speed wind turbines with a full-scale power electronics. To increase the active power as desired, Machine Side Converter is modified with an additional control loop. In the first part of the thesis, active power of the wind turbine is increased to the limits and the maximum achievable active power is found out to be restricted by the wind speed. It is found that the wind turbine can increase its output power by 40% of rated power in ...
A Hardware in the loop simulator development for wind energy conversion systems
Pourkeivannour, Siamak; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2019)
In this thesis a wind turbine emulator is developed to replicate the mechanical and electrical behavior of a real wind energy conversion system. A scaling down algorithm is developed to scale down the mechanical behavior of a real wind energy conversion system to a laboratory scale wind turbine emulator. A user interface software is developed to be used as a supervisory control and data acquisition system for the wind turbine emulator in LABVIEW environment. The accuracy of the scaling down algorithm is ver...
Rüzgar Türbini Kanat Yunuslama Açısı Kontrolcüsü Tasarımı Ve Performans Analizi
Şahin, Mustafa; Yavrucuk, İlkay (2019-10-05)
Bu çalışma, MS (Mustafa ŞAHİN) Bladed Rüzgar Türbin Simülasyon Modeli kullanılarak, NREL 5 MW’lık rüzgar türbini için lineer bir kanat yunuslama açısı kontrolcüsünün tasarımı, türbin kontrollerinde kullanılan bir kazanç çizelgeleme metodunun uygulanması ve performans analizi ile ilgilidir. Tasarımda, tam yük bölgesindeki herhangi bir türbin çalışma noktası için tasarlanan tek bir lineer yunuslama açısı kontrolcüsünün, aynı çalışma bölgesindeki farklı çalışma noktalarında yapılan performans inceleme analizle...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
M. Şahin and İ. Yavrucuk, “Rüzgar Türbinleri için Yenilikçi Uyarlanabilir bir Zarf Koruma Sisteminin Geliştirilmesi ve Farklı Rotor Çaplarındaki Türbinler Üzerinde Simülasyon Testleri,” presented at the 6. İzmir Rüzgar Sempozyumu, İzmir, Türkiye, 2021, Accessed: 00, 2021. [Online]. Available: http://www.ruzgarsempozyumu.org/wp-content/uploads/2021/09/2011-012.pdf.