Rüzgar Türbinlerinin Dinamik Modellenmesinde Belirli Parametrelerin Güç Eğrisi Tahminine Etkilerinin İncelenmesi

2017-11-03
9. Yenilenebilir Enerji Kaynakları Sempozyumu ve Sergisi

Suggestions

Rüzgar Türbinleri için Yenilikçi Uyarlanabilir bir Zarf Koruma Sisteminin Geliştirilmesi ve Farklı Rotor Çaplarındaki Türbinler Üzerinde Simülasyon Testleri
Şahin, Mustafa; Yavrucuk, İlkay (2021-09-23)
Rüzgar Türbini Kanat Yunuslama Açısı Kontrolcüsü Tasarımı Ve Performans Analizi
Şahin, Mustafa; Yavrucuk, İlkay (2019-10-05)
Bu çalışma, MS (Mustafa ŞAHİN) Bladed Rüzgar Türbin Simülasyon Modeli kullanılarak, NREL 5 MW’lık rüzgar türbini için lineer bir kanat yunuslama açısı kontrolcüsünün tasarımı, türbin kontrollerinde kullanılan bir kazanç çizelgeleme metodunun uygulanması ve performans analizi ile ilgilidir. Tasarımda, tam yük bölgesindeki herhangi bir türbin çalışma noktası için tasarlanan tek bir lineer yunuslama açısı kontrolcüsünün, aynı çalışma bölgesindeki farklı çalışma noktalarında yapılan performans inceleme analizle...
Investigation of inertial support limits in wind turbines and the effects on the power system stability
Duymaz, Erencan; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019)
In this study, the inertial support implementation is studied for variable speed wind turbines with a full-scale power electronics. To increase the active power as desired, Machine Side Converter is modified with an additional control loop. In the first part of the thesis, active power of the wind turbine is increased to the limits and the maximum achievable active power is found out to be restricted by the wind speed. It is found that the wind turbine can increase its output power by 40% of rated power in ...
Numerical simulations of wind turbine wake interactions using actuator line and les models
Önel, Hüseyin Can; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2019)
Wind is one of the most promising renewable energy resources of the future. After years of optimization studies, Horizontal Axis Wind Turbines shine out as the most efficient type and have been the only model used in large scale commercial wind farms. Layout planning plays an important role in getting the most power out of a wind farm as much as turbine blade design. Most important parameter in this planning phase is the inevitable wake generated by rotors and its impact on other wind turbines which results...
Design of a modular, axial-flux direct drive permanent magnet generator for wind turbines
Başkaya, Aydın; Keysan, Ozan; Department of Electrical and Electronics Engineering (2018)
Wind energy technology is becoming more important issue in terms of renewable energy applications. Theoretical maximum of wind energy utilization is known (which is predetermined by Betz as 59%) and generally imperfections in blade manufacture reduce the actual energy yield of the turbine less than the useable energy. Therefore, maximum energy yield from generator topology is desired. According to fault statistics of wind turbines, most of the cases are related to gearbox failures. Mechanical losses and hea...
Citation Formats
M. Şahin and İ. Yavrucuk, “Rüzgar Türbinlerinin Dinamik Modellenmesinde Belirli Parametrelerin Güç Eğrisi Tahminine Etkilerinin İncelenmesi,” presented at the 9. Yenilenebilir Enerji Kaynakları Sempozyumu ve Sergisi, Antalya, Türkiye, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/93400.