Investigation of some operational problems of an experimental flexible manufacturing system

Download

068397.pdf

Date

1997

Author

Öztürk, Oytun

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/9525

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Investigation of the tribological behaviour of electrocodeposited Ni-MoS2 composite coatings Güler, Ebru Saraloglu; Konca, Erkan; Karakaya, İshak (2017-01-01) Objective. To discuss a patient with a prenatal diagnosis of unilateral isolated femoral focal deficiency. Case. Antenatal diagnosis of unilateral isolated femoral focal deficiency was made at 20 weeks of gestation. The length of left femur was shorter than the right, and fetal femur length was below the fifth percentile. Proximal femoral focal deficiency was diagnosed. After delivery, the diagnosis was confirmed with skeletal radiographs and magnetic resonance imaging. In prenatal ultrasonographic examinat...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Erdoğan, Metehan; Karakaya, İshak (2018-02-01)
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the rheological properties of çayirhan coal-water mixtures Öztoprak, Ayşe Feray; Hiçyılmaz, Cahit; Department of Mining Engineering (2006) In this thesis, coal-water mixtures (CWM) with Çayırhan lignite were prepared to optimize the parameters of CWM having an ideal behavior which means that at maximum coal loading, relatively stable at static and dynamic conditions and exhibit low viscosity. For this purpose, the effect of the parameters such as pulp density, amount of chemical agents, particle size distribution, addition of methanol and pulp pH were investigated. Results showed that increasing pulp density negatively affects viscosity and al...

Citation Formats

O. Öztürk, “Investigation of some operational problems of an experimental flexible manufacturing system,” Middle East Technical University, 1997.