Heat pipe solar collector combination for energy conversion

Download
038608.pdf
1995
Ebrinç, A. Aslan
Show full item record
77
views
0
downloads
https://hdl.handle.net/11511/9628
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Heat Exchangers
Güvenç Yazıcıoğlu, Almıla; Aylı İnce, Ülkü Ece; Gülben, Gizem; Kakaç, Sadık (ELSEVIER, 2018-01-01)
Comprehensive Energy Systems provides a unified source of information covering the entire spectrum of energy, one of the most significant issues humanity has to face. This comprehensive book describes traditional and novel energy systems, from single generation to multi-generation, also covering theory and applications. In addition, it also presents high-level coverage on energy policies, strategies, environmental impacts and sustainable development. No other published work covers such breadth of topics in ...
Heat removal from a large scale warm water storage
Kayserilioğlu, Yavuz Selim; Oskay, Rüknettin; Department of Mechanical Engineering (2004)
A preliminary experimental study was performed in order to investigate the charging and heat removal characteristics of a sensible heat storage. Two sets of experiments were performed at two aspect ratios. Heat removal processes of these two sets were different while the charging processes were similar. In the first set of experiments, after the charging of the storage unit with relatively warm water was complete, heat removal process was started with simple heat exchangers from different elevations within ...
Heat exchanger network studies in chemical process
Demirkazık, Nükhet; Özgen, Canan; Department of Chemical Engineering (1997)
Heat flux and temperature distrributions in grate fired shell boilers.
Yitmek, Cevdet B; Department of Mechanical Engineering (1982)
Heat treatment of iron ore agglomerates with microwave energy
Çırpar, Çiğdem; Arol, Ali İhsan; Department of Mining Engineering (2005)
Pelletizing is a size enlargement technique employed to process fine-grained iron-bearing concentrates and powder ores. Mechanical strength of fired pellets is important for handling. When the pellets undergo metallurgical processing, their mechanical strength is a measure of their resistance to degradation by breakage due to impacts and abrasion to which they are exposed in the upper part of the blast furnace. In this study, heat treatment of iron ore agglomerates with microwave energy is investigated. Fir...
Citation Formats
A. A. Ebrinç, “Heat pipe solar collector combination for energy conversion,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr