Deflections of reinforced concrete beams and columns

Download
1995
Günel, Halis Mehmet

Suggestions

Reinforced concrete rectangular members subjected to pure torsion.
Berkman, Rıdvan Metin; Ersoy, Uğur; Department of Civil Engineering (1976)
Seismic upgrading of reinforced concrete frames with structural steel elements
Özçelik, Ramazan; Binici, Barış; Department of Civil Engineering (2011)
This thesis examines the seismic internal retrofitting of existing deficient reinforced concrete (RC) structures by using structural steel members. Both experimental and numerical studies were performed. The strengthening methods utilized with the scope of this work are chevron braces, internal steel frames (ISFs), X-braces and column with shear plate. For this purpose, thirteen strengthened and two as built reference one bay one story portal frame specimens having 1/3 scales were tested under constant grav...
Repair and strengthening of reinforced concrete columns
Suleiman, Ramadan E; Ersoy, Uğur; Department of Civil Engineering (1991)
Detailed evaluation of an existing reinforced concrete building damaged under its own weight
Bayraktar, Atilla; Yakut, Ahmet; Department of Civil Engineering (2011)
A significant part of the Turkey’s building inventory consists of reinforced concrete frame structures. In addition to that a big part of the existing building inventory in Turkey shows insufficiency in seismic performance damage or failure of structures under their own loads has also been observed. The failure of Zümrüt Apartment building that occurred in 2004 in Konya and resulted in the death of 92 people brings the necessity of researches on robustness and reserve capacities of the buildings under gravi...
Nonlinear analysis of reinforced concrete frame structures
Çiftçi, Güçlü Koray; Polat, Mustafa Uğur; Department of Civil Engineering (2013)
Reinforced concrete frames display nonlinear behavior both due to its composite nature and the material properties of concrete itself. The yielding of the reinforcement, the non-uniform distribution of aggregates and the development of cracks under loading are the main reasons of nonlinearity. The stiffness of a frame element depends on the combination of the modulus of elasticity and the geometric properties of its section - area and the moment of inertia. In practice, the elastic modulus is assumed to be ...
Citation Formats
H. M. Günel, “Deflections of reinforced concrete beams and columns,” Ph.D. - Doctoral Program, Middle East Technical University, 1995.