An investigation of the applicability of total productive maintenance techniques to a hot strip mill of steel plants

Download
1995
Alkan, Feridun

Suggestions

An Investigation of the Applicability of the In-situ Thermal Recovery Technique to the Beypazari Oil Shale
Kök, Mustafa Verşan (Informa UK Limited, 2011-01-01)
In this research, a 3-D reservoir model for steam recovery was used to study Beypazari oil shale. In addition, the reaction kinetics parameters of Beypazari oil shale were determined by using the Weijdema's reaction kinetics approach in order to evaluate the applicability of these thermal methods. In the analysis of reaction kinetics experiments, two different temperature regions were observed. In the time versus temperature graph, linearly increasing the temperature zone was considered to be the fuel depos...
An Investigation of Activated Sludge Floc Structure in Relation to Solids Retention Time
Sesay, Mohamed Lamin; Sanin, Faika Dilek (2004-04-01)
An investigation of heavy metal biosorption in relation to C/N ratio of activated sludge
Yuncu, Bilgen; Sanin, Faika Dilek; Yetiş, Ülkü (2006-09-21)
The effect of ON ratio of activated sludge on heavy metal biosorption was investigated. Three sets of semi-continuous reactors with different feed ON ratios (9, 21 and 43 mg COD/mg TKN) were set up. Sorption equilibrium tests have indicated that the biosorptive capacity of activated sludge was highly dependent on metal species and the ON ratio. The increase in ON ratio resulted in an increase in the Cd(II) sorption capacity of activated sludge whereas it decreased the Cu(II) sorption capacity. As for Zn(II)...
An Investigation of the increase in variability of standard penetration test results for gravelly soils
Pehlivan, Alper; Yılmaz, Mustafa Tolga; Department of Engineering Sciences (2019)
Variability in the results of standard penetration tests (SPT) due to nonuniformity of particle size distribution in soil layers is a known issue in geotechnical applications. Such phenomenon may result in artificial increase in penetration resistance in silts, clays and sands due to encountering large particles. An analysis of SPT variability in such cases can be conducted by dividing the total penetration distance into two smaller segments. In this study, the difference between number of blow counts for t...
An investigation of the effects of routing flexibility on the manufacturing system
Kuş, Elif; Güllü, Refik; Department of Industrial Engineering (1996)
Citation Formats
F. Alkan, “An investigation of the applicability of total productive maintenance techniques to a hot strip mill of steel plants,” Middle East Technical University, 1995.