Effect Of Anisotropy on the Hydroforming of Aluminum Alloy AA6061-T6 Using Newly Developed Method

Date

2012-02-22

Author

Dzaji, Shahram A
Djavanroodi, Faramarz
Darendeliler, Haluk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

43
views

0
downloads

URI

https://hdl.handle.net/11511/96864

Conference Name

International Mechanical Engineering Forum Prague 2012

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of prolonged heating at 130 degrees C on fatigue crack propagation of 2024 Al alloy in three orientations Sarioglu, F; Orhaner, FO (Elsevier BV, 1998-06-15) An AI-Cu alloy 2024 received in T3 condition (cold worked after solutionizing and natural aging) was heated at 130 degrees C for 100 and 1000 h. Fatigue crack growth tests were carried out before and after heating with center cracked tension specimens machined in L-T, T-L and 60 degrees orientations. Fracture surfaces were studied by means of scanning electron microscopy. It was found that the fatigue crack growth rate depends on the test direction in T3 condition. The orientation effect seemed to be lost a...
Effect of X=Hf and Zr alloying addition on the Microstructures of B2-type ordered Fe0.5(Al1-nXn)0.5 Intermetallics Alloys Yıldırım, Mehmet; Akdeniz, Mahmut Vedat; Mekhrabov, Amdulla (null; 2011-10-05)
Effect of Implanted Phosphorus Profile on iVoc Variations During Firing Process of n-type Silicon Bektaş, Gence; Çiftpınar, Emine Hande; Bütüner, Sümeyye Koçak; Keçeci, Ahmet Emin; Canar, Hasan Hüseyin; Kökbudak, Gamze; Asav, Hasan; Turan, Raşit (2022-08-24) Electrical activation of implanted phosphorus can be carried out simultaneously with boron dopants at high temperatures or separately at lower temperatures. In this study, we investigate the effect of high and low-temperature annealing processes for dopant activation following the phosphorous implantation process in n-type c-Si. Symmetrically implanted wafers are activated at 875 °C (low temperature) and 1050 °C (high temperature) and subsequently coated with PEC VD SiNx:H. iVoc values of the samples activa...
EFFECT OF ELECTROPLATING PARAMETERS ON "HER" CURRENT DENSITY IN Ni-MoS2 COMPOSITE PLATING Guler, Ebru Saraloglu; Karakaya, İshak; KONCA, ERKAN (2012-03-15) Nickel composites with co-deposited insoluble, solid lubricant particles such as MoS2 have been reported to reduce friction. It is known that hydrogen evolution reaction (HER), competes with nickel deposition. The influence of the electroplating parameters and their interaction effects on the peak current density for HER were studied by fractional factorial design. The parameters and their ranges were; MoS2 concentration (0-30 g/l), temperature (30-50 degrees C), pH (2-4) and surfactants (0-1 g/l). Electrod...
Effect of reinforcement surface functionalization on the mechanical properties of nacre-like bulk lamellar composites processed by a hybrid conventional method Gurbuz, Selen N.; Dericioğlu, Arcan Fehmi (2013-05-01) Alumina platelet reinforced epoxy matrix composites with an architecture resembling to natural nacre were fabricated by a hybrid conventional method called Hot-press Assisted Slip Casting process (HASC). Correlation between processing parameters, platelet content, platelet orientation and mechanical property enhancement of the fabricated composites was examined. In order to investigate the effect of interfacial compatibility and bonding on the mechanical properties of the fabricated inorganic-organic compos...

Citation Formats

S. A. Dzaji, F. Djavanroodi, and H. Darendeliler, “Effect Of Anisotropy on the Hydroforming of Aluminum Alloy AA6061-T6 Using Newly Developed Method,” presented at the International Mechanical Engineering Forum Prague 2012, Praha, Çek Cumhuriyeti, 2012, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/96864.