Study of the structure of grafted copolymers on the base of butyl rubber and superhigh-molecular polyethylene

Date

1992-04-01

Author

Aliguliev, R.M.
Gasanov, Kh.A.
Mehrabov, Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

113
views

0
downloads

The specific features of structural changes of compositions of butyl rubber with superhighmolecular polyethylene produced by ultrasonic action were studied in the wide range of component ratios. The growth of interphase structures confirmed by IR- and NMR- spectroscopy, radiothermoluminescence, DTA and DSC methods was shown to improve the compatibility of these compositions. The presented data suggest that the formation of graft-copolymers on the base of PE and butyl rubber is highly affected by ultrasonic action.

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0026840706&origin=inward
https://hdl.handle.net/11511/97226

Journal

Vysokomolekulyarnye Soedineniya Seriya B

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Investigation of phase inversion behavior of cellulose- ionic liquid solutions in relationship with membrane formation Durmaz, Elif Nur; Çulfaz Emecen, Pınar Zeynep; Department of Chemical Engineering (2017) Cellulose membranes were produced from ionic liquid solutions by phase inversion technique and thermodynamic and kinetic aspects of the process were investigated to relate these to membrane morphology and performance. In thermodynamics part, polymer-solvent, polymer-nonsolvent and polymer-solvent-nonsolvent interactions were examined experimentally, together with Hansen solubility parameter estimations. Kinetics part consisted of measuring phase inversion rate. Obtained membranes were characterized by their...
Improvement of organoclay dispersion into polystyrene-based nanocomposites by incorporation of SBS and maleic anhydride-grafted SBS Dike, Ali Sinan; Yılmazer, Ülkü (SAGE Publications, 2020-04-01) In this study, organoclay-containing polystyrene (PS)-based nanocomposites were fabricated by extrusion in the presence of thermoplastic elastomer modifiers. Styrene-butadiene-styrene (SBS) rubber was used as the elastomeric compatibilizer and maleic anhydride (MA) was grafted onto SBS rubber at different ratios. Grafting was made via melt blending. Cloisite (R) 30B was used as the organoclay and it was added to PS and PS/SBS blends using a corotating twin-screw extruder, followed by injection molding. Clay...
Investigation of the effect of dissimilar channel angular pressing method to the mechanical and microstuctural properties of 6061 aluminum alloy sheets Kibar, Alp Aykut; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2010) Dissimilar Channel Angular Pressing (DCAP) method is an effective Severe Plastic Deformation (SPD) technique to improve the mechanical properties of sheets or strips by producing ultrafine grains. The aim of this study is to investigate the evolution of the microstructure and the improvement in mechanical properties of 6061 Al-alloy strips deformed by DCAP up to 5 passes. Mechanical properties such as hardness and strength have been observed to increase up to a certain strain level depending on the microstr...
Investigation of the variations in microstructure and mechanical properties of dual-matrix ductile iron by Magnetic Barkhausen Noise analysis Gür, Cemil Hakan; Erdogan, Mehmet (Informa UK Limited, 2008-01-01) The variations in the microstructure and tensile properties of dual-matrix ductile irons have been investigated non-destructively by Magnetic Barkhausen Noise (MBN) method. Specimens have been intercritically austenitised at 795 degrees C and 815 degrees C for 20 minutes, and then oil-quenched to obtain different martensite volume fractions. Two specimens, namely as-cast and oil-quenched from 900 degrees C, were prepared for comparison purpose. To investigate the effect of tempering, some specimens were tem...
Investigation of the effect of orientation and heat treatment on the stress corrosion cracking susceptibility of 7050 aluminium alloy Çevik, Gül; Doruk, Mustafa; Department of Metallurgical and Materials Engineering (2004) In the present work, the effect of variation in specimen orientation and heat treatment on the Stress Corrosion Cracking (SCC) susceptibility of 7050 aluminum alloy was investigated in 3,5% NaCl solution and under freely corroding conditions. For this purpose, Constant Extension Rate Tests (CERT) was performed on precracked Compact Tension (CT) specimens and the Direct Current Potential Drop technique was applied to measure the crack lengths. In addition to crack length versus time curves, the relationship ...

Citation Formats

R. M. Aliguliev, K. A. Gasanov, and A. Mehrabov, “Study of the structure of grafted copolymers on the base of butyl rubber and superhigh-molecular polyethylene,” Vysokomolekulyarnye Soedineniya Seriya B, vol. 34, no. 4, pp. 12–19, 1992, Accessed: 00, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0026840706&origin=inward.