Structural analysis and design of a management information system in a small size company.

1993
Ulusoy, Bülent

Suggestions

Structural design, analysis and composite manufacturing applications for a tactical unmanned air vehicle
Soysal, Sercan; Kayran, Altan; Department of Aerospace Engineering (2008)
In this study structural design, analysis and composite manufacturing applications for a tactical UAV, which was designed and manufactured in Aerospace Engineering Department of Middle East Technical University (METU), is introduced. In order to make an accurate structural analysis, the material and loading is modeled properly. Computational fluid dynamics (CFD) was used to determine the 3D pressure distribution around the wing and then the nodal forces were exported into the finite element program by means...
Structural equation modeling of customer satisfaction and loyalty for residential air conditioners
Altaban, Ayşegül; Köksal, Gülser; Department of Industrial Engineering (2013)
A major interest of durable goods' producers is factors affecting satisfaction and loyalty of their customers. However, this topic is covered in the literature to a limited extent. Existing studies focus on use of structural equation modeling for studying loyalty for cars, white goods. These are developed as general perception models to serve as customer satisfaction index models for Turkish and also for global consumers. In this study, we also develop a perception model for another durable good, residentia...
Structural design and analysis of the mission adaptive wings of an unmanned aerial vehicle
Ünlüsoy, Levent; Yaman, Yavuz; Department of Aerospace Engineering (2010)
In this study, the structural design and analysis of a wing having mission-adaptive control surfaces were conducted. The wing structure was designed in order to withstand a maximum aerodynamic loading of 5 g due to maneuver. The structural model of the wing was developed by using MSC/PATRAN package program and that structural model was analyzed by using MSC/NASTRAN package program. The designed wing was then manufactured by Turkish Aerospace Industries Inc. (TUSAŞ-TAI). The finite element analysis results w...
Structural identification-based condition assessment: A demonstration of methods applied to a laboratory scale model testbed
Helmicki, A.; Lenett, M.; Greisman, A.; Türer, Ahmet; Hunt, V.; Aktan, A.e. (null; 1999-12-01)
This paper reports on results from an ongoing project to study structural identification-based approaches to the condition assessment of constructed facilities. Under such an approach baseline and sequentially identified system models would be used comparatively to track changes in system parameters and to infer the onset, location, and extent of structural damage, deterioration, and/or defects. As part of the initial phases of this research a scale model grid representing a steel girder highway bridge was ...
Structural analysis, evaluation and recommendations for conservation of the lahore museum /
Shuja, Shajeea; Akyüz, Uğurhan; Şahin Güçhan, Neriman; Conservation of Cultural Heritage in Department of Architecture (2018)
This thesis aims to structurally analyze and evaluate Lahore Museum, Lahore, Pakistan to propose a structural conservation process and formulate recommendations for its conservation. The building completed in 1893 was designed by John Lockwood Kipling and Bhai Ram Singh while Sir Ganga Ram was the engineer incharge. The building besides brick and timber uses metal for the construction of its structural members. The predominant structural system in the building is brick masonry load bearing system while a fe...
Citation Formats
B. Ulusoy, “Structural analysis and design of a management information system in a small size company.,” M.S. - Master of Science, Middle East Technical University, 1993.