Development and Verification of Finite Element Model of a Product-Fixture Assembly used for Shaker Testing

Date

2021-02-11

Author

Türker, Caner
Özgen, Gökhan Osman
Ciğeroğlu, Ender

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

47
views

0
downloads

URI

https://hdl.handle.net/11511/97663

Conference Name

39th IMAC, A Conference and Exposition on Structural Dynamics 2021

Collections

Department of Mechanical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

DEVELOPMENT AND TESTING OF A STATIC DYNAMIC LOCAL GRID-REFINEMENT TECHNIQUE BITERGE, MB; ERTEKIN, T (Society of Petroleum Engineers (SPE), 1992-04-01) Simple, efficient, and stable static and dynamic local grid-refinement procedures for multidimensional, multiphase reservoir problems are developed and tested by isothermal reservoir simulation.
Development and Testing of a Fuzzy Logic Controller for a Small Turbojet Engine Ekinci, Sinan; Üşenmez, Serdar; Yavrucuk, İlkay; Uzol, Oğuz (null; 2016-01-08)
Development and testing of kinematic data acquisition tools for a gait analysis system Karpat, Yiğit; Tümer, Turgut; Department of Mechanical Engineering (2000)
Development and validation of two-dimensional depht-averaged free surface flow solver Yılmaz, Burak; Aydın, İsmail; Department of Civil Engineering (2003) A numerical solution algorithm based on finite volume method is developed for unsteady, two-dimensional, depth-averaged shallow water flow equations. The model is verified using test cases from the literature and free surface data obtained from measurements in a laboratory flume. Experiments are carried out in a horizontal, rectangular channel with vertical solid boxes attached on the sidewalls to obtain freesurface data set in flows where three-dimensionality is significant. Experimental data contain both ...
Development and application of a three-dimensional orthogonal coordinate semi-implicit hydrodynamic model Sankaranarayanan, S.; Ward, Matthew C. (Elsevier BV, 2006-09-01) The Late Quaternary sedimentation and structural features of the continental shelf of Antalya Bay (SW Turkey) have been investigated using a single channel high-resolution shallow profiling system. Two seismic units denoted as unit 1 and unit 2 bounded by two major unconformities (R-1 and R-2) have been identified. R-1 and R-2 are type-1 sequence boundaries that formed under sub-aerial conditions during the Late Quaternary sea level lowstands. An acoustic basement (AB) is recognized in the study region; it ...

Citation Formats

C. Türker, G. O. Özgen, and E. Ciğeroğlu, “Development and Verification of Finite Element Model of a Product-Fixture Assembly used for Shaker Testing,” presented at the 39th IMAC, A Conference and Exposition on Structural Dynamics 2021, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97663.